CEI EN 60335-2-67 : 2013
Current
The latest, up-to-date edition.
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
Hardcopy , PDF
English, English - Italian
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. NORMATIVE REFERENCES
3. DEFINITIONS
4. GENERAL REQUIREMENT
5. GENERAL CONDITIONS FOR THE TESTS
6. CLASSIFICATION
7. MARKING AND INSTRUCTIONS
8. PROTECTION AGAINST ACCESS TO LIVE PARTS
9. STARTING OF MOTOR-OPERATED APPLIANCES
10. POWER INPUT AND CURRENT
11. HEATING
12. VOID
13. LEAKAGE CURRENT AND ELECTRIC STRENGTH
AT OPERATING TEMPERATURE
14. TRANSIENT OVERVOLTAGES
15. MOISTURE RESISTANCE
16. LEAKAGE CURRENT AND ELECTRIC STRENGTH
17. OVERLOAD PROTECTION OF TRANSFORMERS
AND ASSOCIATED CIRCUITS
18. ENDURANCE
19. ABNORMAL OPERATION
20. STABILITY AND MECHANICAL HAZARDS
21. MECHANICAL STRENGTH
22. CONSTRUCTION
23. INTERNAL WIRING
24. COMPONENTS
25. SUPPLY CONNECTION AND EXTERNAL
FLEXIBLE CORDS
26. TERMINALS FOR EXTERNAL CONDUCTORS
27. PROVISION FOR EARTHING
28. SCREWS AND CONNECTIONS
29. CREEPAGE DISTANCES, CLEARANCES AND
DISTANCES THROUGH INSULATION
30. RESISTANCE TO HEAT, FIRE AND TRACKING
31. RESISTANCE TO RUSTING
32. RADIATION, TOXICITY AND SIMILAR HAZARDS
ANNEXES
ANNEX AA (NORMATIVE) - PRECAST PAVING SLABS
ANNEX BB (NORMATIVE) - REQUIREMENTS FOR INTERNAL
COMBUSTION ENGINE POWERED MACHINES USING
LIQUEFIED PETROLEUM GAS (LPG)
ANNEX CC (NORMATIVE) - EMISSION OF ACOUSTICAL NOISE
ANNEX DD (NORMATIVE) - EMISSION OF VIBRATION
ANNEX ZA (NORMATIVE) - SPECIAL NATIONAL CONDITIONS
ANNEZ ZC (NORMATIVE) - REFERENCES TO INTERNATIONAL
PUBLICATIONS WITH THEIR CORRESPONDING
EUROPEAN PUBLICATIONS
ANNEX ZE (INFORMATIVE) - SPECIFIC ADDITIONAL
REQUIREMENTS FOR APPLIANCES AND MACHINES
INTENDED FOR COMMERCIAL USE
ANNEX ZZ (INFORMATIVE) - COVERAGE OF ESSENTIAL
REQUIREMENTS OF EU DIRECTIVE 2006/42/EC
BIBLIOGRAPHY
Describes the safety of powered floor treatment machines intended for commercial indoor or outdoor use for the following applications, scrubbing, wet or dry pick-up, polishing and dry buffing, application of wax, sealing products and powder based detergents, shampooing, stripping, grinding and scarifying of floors with an artificial surface.
| Committee |
CT 59/61
|
| DevelopmentNote |
Classificazione CEI 61-213. (08/2001) To be used in conjunction with CEI EN 60335-1. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Current
|
| Standards | Relationship |
| EN 60335-2-67:2012 | Identical |
| EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 60335-2-68:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012, MODIFIED) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| IEC 60335-2-10:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines |
| IEC 60335-2-72:2016 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| IEC 60335-2-69:2016 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES |
| EN 60335-2-69:2012 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 60335-2-72:2012 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| EN 60335-2-2:2010/A1:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES (IEC 60335-2-2:2009/A1:2012) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| IEC 60335-2-68:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 60335-2-10:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| ISO 6344-2:1998 | Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.