BS PAS 600(2013) : 2013
Current
Current
The latest, up-to-date edition.
BIO-BASED PRODUCTS - GUIDE TO STANDARDS AND CLAIMS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
0 Introduction
1 Scope
2 Terms and definitions
3 Standards relevant to bio-based products
4 Labels, declarations and certification
5 Future standards and guides within the EU
6 Legislation and regulation
Annexes
Annex A (informative) - Case studies
Bibliography
Gives a signpost to key standards, codes of practice and guidance that can be adopted in the production, use and disposal phases of bio-based products. Also gives guidance on the communication of the benefits of bio-based products in a way that is accurate, verifiable, relevant and not misleading. Includes: a) standards that are relevant to the life cycle of a product; b) labelling; c) future areas for standards development; and d) existing and potential future regulatory impacts.
| Committee |
ZZ/4
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
| PD ISO/TR 14047:2012 | Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to impact assessment situations |
| BS PAS 2050(2011) : 2011 | SPECIFICATION FOR THE ASSESSMENT OF THE LIFE CYCLE GREENHOUSE GAS EMISSIONS OF GOODS AND SERVICES |
| PD ISO/TR 14049:2012 | Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis |
| BS EN 15804 : 2012 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - CORE RULES FOR THE PRODUCT CATEGORY OF CONSTRUCTION PRODUCTS |
| ISO 22621-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 2: Pipes |
| PD 6607:1996 | Packaging. Recommendations for conducting life-cycle inventory analysis of packaging systems |
| BS EN 13431:2004 | Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| BS EN ISO 14020:2001 | Environmental labels and declarations. General principles |
| BS EN ISO 14025:2010 | Environmental labels and declarations. Type III environmental declarations. Principles and procedures |
| BS PAS 2060(2010) : 2010 | SPECIFICATION FOR THE DEMONSTRATION OF CARBON NEUTRALITY |
| BS EN ISO 14851:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer |
| BS EN ISO 14040:2006 | Environmental management. Life cycle assessment. Principles and framework |
| PREN 16575 : DRAFT 2013 | BIO-BASED PRODUCTS - VOCABULARY |
| BS 2F 52:1959 | Flax reinforcement webbing for aeronautical purposes |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| BS EN ISO 472:2013 | Plastics. Vocabulary |
| BS EN 15440:2011 | Solid recovered fuels. Methods for the determination of biomass content |
| BS EN ISO 14024:2001 | Environmental labels and declarations. Type I environmental labelling. Principles and procedures |
| IEC 60394-3-1:1976 | Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C |
| BS EN ISO 14064-3:2012 | Greenhouse gases Specification with guidance for the validation and verification of greenhouse gas assertions |
| ISO 22621-3:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 3: Fittings |
| BS 8905:2011 | Framework for the assessment of the sustainable use of materials. Guidance |
| BS EN 13427:2004 | Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste |
| BS EN 15534-5:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Specifications for cladding profiles and tiles |
| ASTM D 7373 : 2012 : REDLINE | Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model |
| BS ISO 15985 : 2014 | PLASTICS - DETERMINATION OF THE ULTIMATE ANAEROBIC BIODEGRADATION UNDER HIGH-SOLIDS ANAEROBIC-DIGESTION CONDITIONS - METHOD BY ANALYSIS OF RELEASED BIOGAS |
| BS EN 14995:2006 | Plastics. Evaluation of compostability. Test scheme and specifications |
| BS EN ISO 14855-1:2012 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide General method |
| BS ISO 13738:2011 | Lubricants, industrial oils and related products (class L). Family E (Internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| BS 5689-3.1:1996 | Varnished fabrics for electrical purposes. Specifications for individual materials Oleoresinous varnish. Cotton base, OR/C |
| ISO 18606:2013 | Packaging and the environment — Organic recycling |
| PD CEN/TR 16208:2011 | Biobased products. Overview of standards |
| BS 3183:1968 | Method for the determination of wool fibre diameter by the airflow method |
| BS EN ISO 14064-1:2012 | Greenhouse gases Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| BS EN ISO 14021:2016 | Environmental labels and declarations. Self-declared environmental claims (Type II environmental labelling) |
| BS EN ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| BS EN ISO 14852:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide |
| BS EN ISO 17556:2012 | Plastics. Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved |
| ISO 17088:2012 | Specifications for compostable plastics |
| BS ISO 16929:2013 | Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| BS EN 13430:2004 | Packaging. Requirements for packaging recoverable by material recycling |
| ASTM D 6868 : 2017 : REDLINE | Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| PD CEN/TR 13910:2010 | Packaging. Report on criteria and methodologies for life cycle analysis of packaging |
| BS ISO 15380:2016 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| PD CEN/TR 15932:2010 | Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics |
| BS EN 13432:2000 | Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General |
| BS ISO 13975:2012 | Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of biogas production |
| BS EN 13429:2004 | Packaging. Reuse |
| BS EN ISO 14044 : 2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| BS ISO 14853:2005 | Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production |
| PD CEN/TR 16227:2011 | Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
| BS EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| BIP 2181 : 2011 | THE GUIDE TO PAS 2050:2011 - HOW TO CARBON FOOTPRINT YOUR PRODUCTS, IDENTIFY HOTSPOTS AND REDUCE EMISSIONS IN YOUR SUPPLY CHAIN |
| BS EN ISO 14064-2:2012 | Greenhouse gases Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements |
| CR 12340:1996 | Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems |
| ASTM D 1441 : 2012 : REDLINE | Standard Practice for Sampling Cotton Fibers for Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.