BS ISO 8992:2005
Current
The latest, up-to-date edition.
Fasteners. General requirements for bolts, screws, studs and nuts
Hardcopy , PDF
English
04-27-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Specifications and reference standards
4 General requirements
Provides the general requirements for standardized bolts, screws, studs and nuts, but is also recommended for these non-standardized fasteners.
| Committee |
FME/9
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This International Standard specifies the general requirements for standardized bolts, screws, studs and nuts, but is also recommended for these non-standardized fasteners. It is intended to be used with reference to the related International Standards on tolerances, mechanical and performance characteristics, geometrical features, surface discontinuities, surface finishes and quality aspects.
| Standards | Relationship |
| ISO 8992:2005 | Identical |
| BS 7419:2012 | Specification for holding down bolts |
| BS 4933:2010 | Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts |
| 12/30258706 DC : 0 | BS 7419 - SPECIFICATION FOR HOLDING DOWN BOLTS |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 898-7:1992 | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 885:2000 | General purpose bolts and screws — Metric series — Radii under the head |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 965-5:1998 | ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| ISO 4753:2011 | Fasteners Ends of parts with external ISO metric thread |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 2320:2015 | Fasteners Prevailing torque steel nuts Functional properties |
| ISO 7721:1983 | Countersunk head screws — Head configuration and gauging |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 898-6:1994 | Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 3508:1976 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
| ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 4755:1983 | Fasteners — Thread undercuts for external metric ISO threads |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
| ISO 10664:2014 | Hexalobular internal driving feature for bolts and screws |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| ISO 1478:1999 | Tapping screws thread |
| ISO 4757:1983 | Cross recesses for screws |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 7378:1983 | Fasteners — Bolts, screws and studs — Split pin holes and wire holes |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.