BS ISO 8217:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Petroleum products. Fuels (class F). Specifications of marine fuels
Hardcopy , PDF
05-31-2024
English
03-31-2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Application and sampling
5 General requirements
6 Test methods
7 Specific energy
8 Precision and interpretation of test results
Annex A (informative) - Bio-derived products
including fatty acid methyl esters
Annex B (informative) - Deleterious materials
Annex C (informative) - Ignition characteristics
of residual marine fuels
Annex D (informative) - Hydrogen sulfide
Annex E (informative) - Acidity
Annex F (informative) - Ash
Annex G (informative) - Used lubricating oil
Annex H (informative) - Specific energy
Bibliography
Describes the requirements for fuels for use in marine diesel engines and boilers, prior to conventional onboard treatment (settling, centrifuging, filtration) before use.
Committee |
PTI/2
|
DevelopmentNote |
Supersedes BS MA100(1996) and 01/124221 DC. (01/2006) Supersedes 09/30206973 DC. (07/2010) Supersedes 16/30294369 DC. (03/2017)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO 8217:2017 | Identical |
10/30218583 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
DEFSTAN 02-320/3(2009) : 2009 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-309/3(2007) : 2007 | REQUIREMENTS FOR GAS TURBINES |
DEFSTAN 02-320/4(2015) : 2015 | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
17/30351591 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
BS 2869:2017 | Fuel oils for agricultural, domestic and industrial engines and boilers Specification |
BS 2869(2010) : 2010 | FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
ISO 3016:1994 | Petroleum products Determination of pour point |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
ISO 10307-1:2009 | Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 4264:2007 | Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
ISO 10478:1994 | Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
ISO 8216-1:2017 | Petroleum products — Fuels (class F) classification — Part 1: Categories of marine fuels |
CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
ASTM D 7963 : 2014 | Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method |
IMO ID520 : 2011 | MARPOL CONSOLIDATED EDITION |
ISO 13739:2010 | Petroleum products Procedures for transfer of bunkers to vessels |
ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
ISO 10307-2:2009 | Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing |
ISO 6245:2001 | Petroleum products — Determination of ash |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
ISO/TR 18455:1999 | Petroleum products Calculation of specific energy of residual fuels from physical and compositional properties Basic data |
ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
ISO 3015:1992 | Petroleum products — Determination of cloud point |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.