BS ISO 6336-5:2016
Current
The latest, up-to-date edition.
Calculation of load capacity of spur and helical gears Strength and quality of materials
Hardcopy , PDF
English
08-31-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Methods for the determination of
allowable stress numbers
5 Standard allowable stress numbers - Method B
6 Requirements for material quality
and heat treatment
Annex A (informative) - Considerations of size of
controlling section for through hardened
gearing
Annex B (informative) - Core hardness coefficients
Bibliography
Defines contact and tooth-root stresses and gives numerical values for both limit stress numbers.
| Committee |
MCE/5
|
| DevelopmentNote |
Supersedes 90/76543 DC. (03/2005) Supersedes 15/30269176 DC. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 6336-5:2016 | Identical |
| BS 7905-1:2001 | Lifting equipment for performance, broadcast and similar applications Specification for the design and manufacture of above stage equipment (excluding trusses and towers) |
| DEFSTAN 02-381/1(2009) : 2009 | REQUIREMENTS FOR THE FORGING AND HEAT TREATMENT OF MAIN PROPULSION GEARS |
| DEFSTAN 02-305/2(2003) : 2003 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| DEFSTAN 02-305/3(2010) : 2010 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| ISO 2639:2002 | Steels Determination and verification of the depth of carburized and hardened cases |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| SAE J 2441 : 2015 | SHOT PEENING |
| ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| SAE AMS 2432 : 2013 | SHOT PEENING, COMPUTER MONITORED |
| SAE AMS 2430 : 2015 | SHOT PEENING |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| SAE AMS 2432 : 2013 | SHOT PEENING, COMPUTER MONITORED |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| ISO 683-2:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering |
| ISO 12107:2012 | Metallic materials — Fatigue testing — Statistical planning and analysis of data |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| ISO 3754:1976 | Steel — Determination of effective depth of hardening after flame or induction hardening |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.