BS ISO 6194-1:2007
Current
The latest, up-to-date edition.
Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances
03-31-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Seal types and examples
5.1 Seal outside-diameter construction
5.2 Sealing lip arrangements
6 Pressure and nominal dimensions
6.1 Pressure
6.2 Nominal dimensions
7 Shafts
7.1 Shaft ends
7.2 Diametral tolerance
7.3 Surface roughness and hardness
8 Housings
8.1 Dimensions
8.2 Housing-bore tolerance
8.3 Housing-bore surface roughness
9 Seal tolerances
9.1 Seal width
9.2 Seal outside diameter
10 Size identification code
11 Identification statement
Annex A (informative) - Seal specification
Bibliography
Describes seals utilising elastomeric sealing elements.
| Committee |
MCE/18/-/3
|
| DevelopmentNote |
Supersedes BS 7780-1(1994) & 05/30032019 DC. (03/2008)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO6194 describes seals utilising elastomeric sealing elements. They are considered suitable for use under low-pressure conditions (see 6.1).
This part of ISO6194 shows seal types and examples. It also specifies the nominal dimensions and tolerances of the seals, shafts and housings, as well as a dimensional identification code.
NOTE ISO6194 is complementary to ISO16589 which covers seals incorporating thermoplastic sealing elements.
| Standards | Relationship |
| ISO 6194-1:2007 | Identical |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 6194-5:2008 | Rotary-shaft lip-type seals incorporating elastomeric sealing elements — Part 5: Identification of visual imperfections |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 16589-5:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections |
| ISO 16589-1:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| ISO 16589-3:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation |
| ISO 7986:1997 | Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| ISO 6194-3:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 3: Storage, handling and installation |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
| ISO 16589-2:2001 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.