BS ISO 4802-2:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification
Hardcopy , PDF
12-13-2023
English
06-30-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
6 Apparatus
7 Sample preparation
8 Procedure
9 Expression of results
10 Test report
11 Reproducibility
Bibliography
Defines: a) methods for determining the hydrolytic resistance of the interior surfaces of glass containers when subjected to attack by water at (121 +/-1) degrees C for (60 +/-1) min. The resistance is measured by determining the amount of sodium and other alkali metal or alkaline earth oxides in the extraction solution using flame atomic emission or absorption spectrometry (flame spectrometry); and b) a classification of glass containers according to the hydrolytic resistance of the interior surfaces determined by the methods specified in ISO 4802-2:2016.
| Committee |
CH/212
|
| DevelopmentNote |
Supersedes BS 3473-4.2(1989) and 09/30178949 DC. (06/2010) Supersedes 15/30315528 DC. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This part of ISO4802 specifies: methods for determining the hydrolytic resistance of the interior surfaces of glass containers when subjected to attack by water at (121±1)°C for (60±1)min. The resistance is measured by determining the amount of sodium and other alkali metal or alkaline earth oxides in the extraction solution using flame atomic emission or absorption spectrometry (flame spectrometry); a classification of glass containers according to the hydrolytic resistance of the interior surfaces determined by the methods specified in this part of ISO4802. The test method specified in this part of ISO4802 might not be applicable to containers whose surfaces have been treated with silicon (e.g. containers that are ready for direct filling).
| Standards | Relationship |
| ISO 4802-2:2016 | Identical |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| ISO 13926-1:2004 | Pen systems Part 1: Glass cylinders for pen-injectors for medical use |
| ISO 385:2005 | Laboratory glassware — Burettes |
| ISO 720:1985 | Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 3819:2015 | Laboratory glassware — Beakers |
| ISO 8362-4:2011 | Injection containers and accessories Part 4: Injection vials made of moulded glass |
| ISO 8362-1:2009 | Injection containers and accessories Part 1: Injection vials made of glass tubing |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles |
| ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles |
| ISO 11040-1:2015 | Prefilled syringes Part 1: Glass cylinders for dental local anaesthetic cartridges |
| ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
| ISO 9187-1:2010 | Injection equipment for medical use Part 1: Ampoules for injectables |
| ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Part 7: Screw-neck vials made of glass tubing for liquid dosage forms |
| ISO 8536-1:2011 | Infusion equipment for medical use Part 1: Infusion glass bottles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.