BS ISO 4589-2 : 1996 AMD 10627
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - AMBIENT-TEMPERATURE TEST
10-15-1999
11-23-2012
1 Scope
2 Normative references
3 Definition
4 Principle
5 Apparatus
6 Calibration of equipment
7 Preparation of test specimens
8 Procedure for determination of oxygen index
9 Calculations and expression of results
10 Procedure C - Comparison with a specified minimum
value of the oxygen index (short procedure)
11 Test report
Annexes
A Calibration of equipment
B Calculation of oxygen concentration
C Typical test results sheet
D Results obtained by interlaboratory trials on type
VI specimens
Describes methods for determination of minimum concentration of oxygen with nitrogen to support combustion of small vertical test specimens under specified test conditions. BS AMD 10627 RENUMBERS THIS STANDARD.
| Committee |
PRI/26
|
| DevelopmentNote |
Renumbered and superseded by BS EN ISO 4589-2. Supersedes BS 2782-1.141(1986) and 92/46504 DC. (10/2005)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 4589-2:2017 | Identical |
| DEFSTAN 47-32/1(2002) : 2002 | RUBBER HOSE AND HOSE ASSEMBLIES FOR HYDRAULIC SYSTEMS |
| BS 7870-6.3:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath |
| BS 7870-6.2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables |
| DEFSTAN 02-102(PT1)/2(2000) : 2000 | REQUIREMENTS FOR AIR CONDITIONING & VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
| BS 4G 198-3:1999 | Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation, and identification |
| BS 6853:1999 | Code of practice for fire precautions in the design and construction of passenger carrying trains |
| DEFSTAN 47-32/2(2011) : 2011 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| BS 7870-7.1:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
| BS 4N 100-2:1999 | Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen |
| BS 7870-6.1:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations PVC insulated and PVC sheathed cables |
| DEFSTAN 02-345/1(2000) : 2000 AMD 1 2002 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 10 BAR |
| DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| BS 7870-7.2:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 294:1995 | Plastics Injection moulding of test specimens of thermoplastic materials |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.