BS ISO 2230:2002
Current
The latest, up-to-date edition.
Rubber products. Guidelines for storage
Hardcopy , PDF
English
05-20-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of rubber types according to their
relative susceptibility to deterioration
5 Packaging
6 Storage
7 Inspection, testing and recording of data during storage
Annex
A Recommendations for inspection and testing of specific
products
Bibliography
Gives guidelines for the inspection, recording procedures, packaging and storage of products, assemblies and components made from vulcanized or thermoplastic rubber prior to being put into circulation. Applies to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources.
| Committee |
PRI/73
|
| DevelopmentNote |
Supersedes BS 3574(1989), 96/122187 DC and 98/126149 DC (06/2002) Reviewed and confirmed by BSI, April 2018. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO 12757 establishes minimum quality requirements for ball point pens (refillable or non-refillable) and refills for general use.
Additional requirements for ball point pens for documentary use are given in ISO 12757-2.
| Standards | Relationship |
| ISO 2230:2002 | Identical |
| DEFSTAN 81-55/5(2009) : 2009 | PACKAGING OF MECHANICAL COMPONENTS |
| DEFSTAN 93-57/2(2004) : 2004 | RUBBER SHEET, CELLULAR (CLOSED CELL, NON-OIL RESISTANT) |
| DEFSTAN 81-055/8(2021):2021 | Packaging of Mechanical Components & Items |
| 04/103063 DC : DRAFT JAN 2004 | BS 7714 - GUIDE FOR CARE AND HANDLING OF SEALS FOR FLUID POWER APPLICATIONS |
| 02/123418 DC : DRAFT AUG 2002 | BS 903-3 - PHYSICAL TESTING OF RUBBER - PART 3: ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| DEFSTAN 93-41/3(2004) : 2004 | RUBBER SHEET, CELLULAR, OPEN CELL, MINIMUM TARNISHING |
| DEFSTAN 07-283/2(2017) : 2017 | SPECIFICATION FOR THE TYPE P RESILIENT MOUNT |
| DEFSTAN 07-288/2(2017) : 2017 | SPECIFICATION FOR THE TYPE 'PD' AND SUPER 'D' MOUNTS |
| BS 6920-2.1:2014 | Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Methods of test - Samples for testing |
| BS 3227:2003 | Butyl rubber compounds (including halobutyl compounds). Specification |
| BS 2752:2003 | Chloroprene rubber compounds. Specification |
| BS 6014:2003 | Ethylene propylene rubber compounds. Specification |
| BS 1155:2003 | Natural rubber compounds for extrusion. Specification |
| BS 6996:2003 | Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification |
| BS 4F 68:2002 | Controlled storage of vulcanized rubbers for use in aerospace applications |
| DEFSTAN 47-32/2(2011) : 2011 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| DEFSTAN 81-41(PT6)/9(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 81-41(PT1)/7(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| DEFSTAN 81-60/3(2009) : 2009 | PACKAGING OF GASKETS, SEALS, 'O' RINGS, GROMMETS AND SIMILAR MATERIEL |
| BS 1154:2003 | Natural rubber compounds. Specification |
| BS 7714:2005 | Care and handling of seals for fluid power applications. Guide |
| BS 903-3:2003 | Physical testing of rubber Acquisition and presentation of comparable single-point data |
| 13/30287567 DC : 0 | BS 6920-2.1 - SUITABILITY OF NON-METALLIC PRODUCTS FOR USE IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION WITH REGARD TO THEIR EFFECT ON THE QUALITY OF THE WATER - PART 2: METHODS OF TEST - SECTION 2.1: SAMPLES FOR TESTING |
| DEFSTAN 07-286/2(2017) : 2017 | SPECIFICATION FOR THE TYPE 'K' RESILIENT MOUNT |
| DEFSTAN 81-41(PT1)/6(2006) : 2006 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| DEFSTAN 81-41(PT1)/8(2014) : 2014 | PACKAGING OF DEFENCE MATERIAL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| DEFSTAN 07-287/2(2017) : 2017 | SPECIFICATION FOR THE TYPE 'U' MOUNTS |
| DEFSTAN 81-39/5(2012) : 2012 | PACKAGING OF RUBBER HOSES, PLASTICS HOSES, AND HOSE ASSEMBLIES |
| DEFSTAN 81-94/5(2014) : 2014 | PACKAGING OF CONSUMABLE STORES WHEN A MILITARY LEVEL OR CODE IS NOT STIPULATED |
| DEFSTAN 81-41(PT6)/8(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 81-55/6(2013) : 2013 | PACKAGING OF MECHANICAL COMPONENTS |
| DEFSTAN 81-055/7(2017) : 2017 | PACKAGING OF MECHANICAL COMPONENTS & ITEMS |
| DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| BS 903-4:2003 | Physical testing of rubber Acquisition and presentation of comparable multi-point data |
| DEFSTAN 81-60/4(2014) : 2014 | PACKAGING OF GASKETS, SEALS, 'O' RINGS, GROMMETS AND SIMILAR MATERIEL |
| DEFSTAN 81-94/4(2009) : 2009 | PACKAGING OF CONSUMABLE STORES WHEN A MILITARY LEVEL OR CODE IS NOT STIPULATED |
| DEFSTAN 81-41(PT6)/7(2010) : 2010 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
| DEFSTAN 81-041(PT1)/9(2016) : 2016 | PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS |
| DEFSTAN 81-39/4(2005) : 2005 | PACKAGING OF RUBBER HOSES, PLASTICS HOSES, AND HOSE ASSEMBLIES |
| DEFSTAN 93-21/4(2004) : 2004 | CHLOROPRENE RUBBER, CELLULAR, CLOSED CELL, MINIMUM TARNISHING |
| DEFSTAN 93-57/3(2009) : 2009 | RUBBER SHEET, CELLULAR (CLOSED CELL, NON-OIL RESISTANT) |
| DEFSTAN 07-285/2(2017) : 2017 | SPECIFICATION FOR THE TYPE 'L' AND TYPE 'M' RESILIENT MOUNTS |
| DEFSTAN 81-39/6(2015) : 2015 | PACKAGING OF RUBBER HOSES, PLASTICS HOSES; AND HOSE ASSEMBLIES |
| ISO 7664:2000 | Rubber, raw natural and raw synthetic General guidance on storage |
| ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
| ISO 4591:1992 | Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 5285:2012 | Conveyor belts — Guidelines for storage and handling |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 5978:1990 | Rubber- or plastics-coated fabrics — Determination of blocking resistance |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 4223-2:1991 | Definitions of some terms used in the tyre industry — Part 2: Solid tyres |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.