BS ISO 13380:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
Hardcopy , PDF
06-30-2011
English
01-31-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Monitored parameters
4.1 Type of parameters
4.2 Type of measurement
4.3 Accuracy of monitored parameters
4.4 Other causes of change to measured values
5 Measurement procedure
5.1 Feasibility of measurement
5.2 Operating conditions during measurements
5.3 Measurement interval
5.4 Data acquisition rate
5.5 Record of monitored parameters
6 Fault diagnosis
6.1 Procedure for fault diagnosis
6.2 Criteria for fault diagnosis
Annex A (informative) Examples of parameters related to
performance for a range of machine types
Annex B (informative) Typical information to be recorded when
monitoring
Annex C (informative) Examples of faults indicated by performance
parameter change
Annex D (informative) Form for recording typical machine details
Bibliography
Explains the general conditions and procedures for recording, assessment, evaluation and diagnostics of machine condition by measuring parameters related to machine performance, condition and safety, including thermal, electrical and hydraulic parameters where applicable.
| Committee |
GME/21/7
|
| DevelopmentNote |
Supersedes 00/702358 DC. (02/2007)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 13380:2002 | Identical |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| ISO 13373-1:2002 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
| ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
| ISO 10056:2001 | Mechanical vibration Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| ISO 13379:2003 | Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ISO 9908:1993 | Technical specifications for centrifugal pumps — Class III |
| ISO 8579-2:1993 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 4020:2001 | Road vehicles — Fuel filters for diesel engines — Test methods |
| ISO 6954:2000 | Mechanical vibration Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| ISO 5389:2005 | Turbocompressors — Performance test code |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| ISO 13350:2015 | Fans — Performance testing of jet fans |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 8821:1989 | Mechanical vibration Balancing Shaft and fitment key convention |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ISO 3555:1977 | Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class B |
| ISO 8002:1986 | Mechanical vibrations — Land vehicles — Method for reporting measured data |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance |
| ISO 3046-1:2002 | Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
| ISO 13374-1:2003 | Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines |
| ISO 1940-2:1997 | Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors |
| ISO 3046-3:2006 | Reciprocating internal combustion engines Performance Part 3: Test measurements |
| ISO 4392-3:1993 | Hydraulic fluid power — Determination of characteristics of motors — Part 3: At constant flow and at constant torque |
| ISO 17359:2011 | Condition monitoring and diagnostics of machines General guidelines |
| ASME PTC22 : 2014 | GAS TURBINES |
| SAE ARP 1587 : 2013 | AIRCRAFT GAS TURBINE ENGINE HEALTH MANAGEMENT SYSTEM GUIDE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.