BS ISO 10326-2:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles
Hardcopy , PDF
08-19-2022
English
10-19-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
GME/21/6
|
| DevelopmentNote |
Supersedes 96/714931 DC (11/2001)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This part of ISO10326 defines specifications covering laboratory tests for seats designed for passengers and crew in railway tractive and trailer vehicles.
It concerns tri-axial rectilinear vibration within the frequency range 0,5Hz to 50Hz. It specifies the input test vibration to be used at seat testing.
This part of ISO10326 makes it possible to characterize, in the form of frequency response functions, the manner in which vibration is transmitted to the seat occupant. However, this characterization is fully valid only when the man-seat system can be considered to be sufficiently linear.
| Standards | Relationship |
| ISO 10326-2:2001 | Identical |
| ISO 5347-9:1993 | Methods for the calibration of vibration and shock pick-ups — Part 9: Secondary vibration calibration by comparison of phase angles |
| ISO 5347-13:1993 | Methods for the calibration of vibration and shock pick-ups Part 13: Testing of base strain sensitivity |
| ISO 5347-14:1993 | Methods for the calibration of vibration and shock pick-ups Part 14: Resonance frequency testing of undamped accelerometers on a steel block |
| ISO 5347-22:1997 | Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods |
| ISO 5347-19:1993 | Methods for the calibration of vibration and shock pick-ups Part 19: Testing of magnetic field sensitivity |
| ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
| ISO 5347-3:1993 | Methods for the calibration of vibration and shock pick-ups Part 3: Secondary vibration calibration |
| ISO 13090-1:1998 | Mechanical vibration and shock — Guidance on safety aspects of tests and experiments with people — Part 1: Exposure to whole-body mechanical vibration and repeated shock |
| ISO 5347-1:1993 | Methods for the calibration of vibration and shock pick-ups Part 1: Primary vibration calibration by laser interferometry |
| ISO 5347-0:1987 | Methods for the calibration of vibration and shock pick-ups Part 0: Basic concepts |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 5347-16:1993 | Methods for the calibration of vibration and shock pick-ups Part 16: Testing of mounting torque sensitivity |
| ISO 16063-1:1998 | Methods for the calibration of vibration and shock transducers Part 1: Basic concepts |
| ISO 5347-4:1993 | Methods for the calibration of vibration and shock pick-ups Part 4: Secondary shock calibration |
| ISO 5347-12:1993 | Methods for the calibration of vibration and shock pick-ups Part 12: Testing of transverse shock sensitivity |
| ISO 16063-11:1999 | Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry |
| ISO 5347-18:1993 | Methods for the calibration of vibration and shock pick-ups Part 18: Testing of transient temperature sensitivity |
| ISO 16063-13:2001 | Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 5347-5:1993 | Methods for the calibration of vibration and shock pick-ups Part 5: Calibration by Earth's gravitation |
| ISO 5347-8:1993 | Methods for the calibration of vibration and shock pick-ups Part 8: Primary calibration by dual centrifuge |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 5347-17:1993 | Methods for the calibration of vibration and shock pick-ups Part 17: Testing of fixed temperature sensitivity |
| ISO 5347-2:1993 | Methods for the calibration of vibration and shock pick-ups — Part 2: Primary shock calibration by light cutting |
| ISO 5347-11:1993 | Methods for the calibration of vibration and shock pick-ups Part 11: Testing of transverse vibration sensitivity |
| ISO 5347-10:1993 | Methods for the calibration of vibration and shock pick-ups Part 10: Primary calibration by high impact shocks |
| ISO 5347-20:1997 | Methods for the calibration of vibration and shock pick-ups Part 20: Primary vibration calibration by the reciprocity method |
| ISO 5347-7:1993 | Methods for the calibration of vibration and shock pick-ups Part 7: Primary calibration by centrifuge |
| ISO 5347-15:1993 | Methods for the calibration of vibration and shock pick-ups Part 15: Testing of acoustic sensitivity |
| ISO 5347-6:1993 | Methods for the calibration of vibration and shock pick-ups Part 6: Primary vibration calibration at low frequencies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.