BS IEC 60092-306:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrical installations in ships Equipment. Luminaires and lighting accessories
Hardcopy , PDF
12-06-2022
English
02-28-2010
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements on luminaires
5 Requirements on lighting accessories
6 Requirements on socket-outlets and plugs for
luminaires connection
7 Tests
8 Packaging and marking
Bibliography
Pertains to luminaires and lighting accessories for use in ships.
Committee |
JPEL/18
|
DevelopmentNote |
Supersedes 08/30186163 DC. (02/2010)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEC 60092-306:2009(E) applies to luminaires and lighting accessories for use in ships. It applies primarily to luminaires for illumination purposes. NOTE - Boats, submarines (except naval submarines), watercraft and floating equipment are ships to which this standard applies. This standard also applies to lighting accessories associated with the wiring and current consuming appliance of an installation. This standard does not apply to portable luminaires, navigation lights, search lights, daylight signalling lamps, signal lights including the relevant control and monitoring equipment and other lights used for navigation in channels, harbours, etc. This edition includes the following significant technical changes with respect to the previous edition.
a) Title has been amended;
b) Scope has been stated more precisely;
c) Requirements on mechanical design and materials have been amended and stated more precisely;
d) Table 2 - Standard types of lampholders, has been amended;
e) Environmental tests, especially regarding shock and vibration have been added;
f) Requirements and tests concerning special chemical and physical attributes have been added;
g) Standard has been editorially revised.
Standards | Relationship |
IEC 60092-306:2009 | Identical |
BS 8450:2006 | Code of practice for installation of electrical and electronic equipment in ships |
IEC TR 60721-4-6:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60838-1:2016+AMD1:2017 CSV | Miscellaneous lampholders - Part 1: General requirements and tests |
IEC 60092-352:2005 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
DEFSTAN 02-713/2(2006) : 2006 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
IEC 61995-2:2009+AMD1:2016 CSV | Devices for the connection of luminaires for household and similarpurposes - Part 2: Standard sheets for DCL |
IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
IEC 60092-201:1994 | Electrical installations in ships - Part 201: System design - General |
EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
ISO 25861:2007 | Ships and marine technology — Navigation — Daylight signalling lamps |
ISO 17884:2004 | Ships and marine technology — Searchlights for high-speed craft |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
ISO 9001:2015 | Quality management systems — Requirements |
EN 13032-1:2004+A1:2012 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
IEC 61995-1:2005+AMD1:2016 CSV | Devices for the connection of luminaires for household and similarpurposes - Part 1: General requirements |
EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
HD 22-9 : 200S3 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 9: SINGLE CORE HALOGEN-FREE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE |
IEC 60155:1993 | Glow-starters for fluorescent lamps |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
IEC 60092-101:1994+AMD1:1995 CSV | Electrical installations in ships - Part 101: Definitions and general requirements |
IEC 62444:2010 | Cable glands for electrical installations |
IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
IEC 61184:2017 | Bayonet lampholders |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.