BS EN ISO 80079-37:2016
Current
The latest, up-to-date edition.
Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
Hardcopy , PDF
English
06-30-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Determination of suitability
5 Requirements for equipment with Type of Protection
constructional safety 'c'
6 Requirements for equipment with Type of Protection
control of ignition source 'b'
7 Requirements for equipment with Type of Protection
liquid immersion 'k'
8 Type tests
9 Documentation
10 Marking
Annex A (informative) - Approach and application:
equipment with Type of Protection 'c'
Annex B (normative) - Test requirements
Annex C (informative) - Methodology: equipment with
Type of Protection 'b'
Annex D (informative) - Approach to assign the required
ignition protection type used for equipment to achieve
different EPL
Annex E (informative) - Information on functional safety
concept
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2014/34/EU
Annex ZB (informative) - - Significant changes between
this European Standard and EN 13463-5:2011,
EN 13463-6:2005 and EN 13463-8:2003
Defines the requirements for the design and construction of nonelectrical equipment intended for use in explosive atmospheres protected by the types of protection constructional safety 'c', control of ignition source 'b' and liquid immersion 'k'.
| Committee |
EXL/23
|
| DevelopmentNote |
Supersedes BS EN 13463, BS EN 13463-6, BS EN 13463-8 & 12/30243459 DC.(05/2016)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This PART of ISO/IEC 80079 specifies the requirements for the design and construction of non-electrical equipment, intended for use in explosive atmospheres, protected by the types of protection constructional safety \'c\', control of ignition source \'b\' and liquid immersion \'k\'.
This PART of ISO/IEC 80079 supplements and modifies the requirements in ISO 80079-36 . Where a requirement of this standard conflicts with the requirement of ISO 80079-36 the requirement of this standard takes precedence.
Types of Protection \'c\', \'k\' and \'b\' are not applicable for Group I, EPL Ma without additional protective precautions.
The types of ignition protection described in the standard can be used either on their own or in combination with each other to meet the requirements for equipment of Group I, Group II, and Group III depending on the ignition hazard assessment in ISO 80079-36 .
| Standards | Relationship |
| EN ISO 80079-37:2016 | Identical |
| ISO 80079-37:2016 | Identical |
| ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.