BS EN ISO 2813:2014
Current
The latest, up-to-date edition.
Paints and varnishes. Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
Hardcopy , PDF
English
10-31-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Basic principles of the gloss measurement
6 Apparatus and calibration equipment
7 Test panels
8 Calibration and adjustment of the glossmeter
9 Procedure
10 Precision
11 Test report
Annex A (normative) - Possible sources of error
Annex B (normative) - Calibration standards
Annex C (informative) - Gloss calculation of primary
reference standards
Annex D (informative) - Details on precision
Bibliography
Defines a method for determining the gloss of coatings using the three geometries of 20 degrees, 60 degrees or 85 degrees.
| Committee |
STI/10
|
| DevelopmentNote |
Renumbers and supersedes BS 3900-D5(1997). 2000 Version incorporates amendment 10590 to BS 3900-D5(1997). Supersedes BS 3900-D5(1995) and 89/55651 DC. (10/2005) Supersedes 12/30229691 DC. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies a method for determining the gloss of coatings using the three geometries of 20°, 60° or 85°. The method is suitable for the gloss measurement of non-textured coatings on plane, opaque substrates.
NOTE On test specimens different from these mentioned above, comparative gloss measurements are possible. However, it is not ensured that the obtained gloss values correspond to the visual gloss perception (see AnnexA).
| Standards | Relationship |
| UNE-EN ISO 2813:2015 | Identical |
| DIN EN ISO 2813:2015-02 | Identical |
| EN ISO 2813:2014 | Identical |
| NBN EN ISO 2813 : 2014 | Identical |
| NEN EN ISO 2813 : 2014 | Identical |
| I.S. EN ISO 2813:2014 | Identical |
| NS EN ISO 2813 : 2014 | Identical |
| UNI EN ISO 2813 : 2001 | Identical |
| NF EN ISO 2813 : 2014 | Identical |
| SN EN ISO 2813 : 2014 | Identical |
| ISO 2813:2014 | Identical |
| 09/30196835 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| DEFSTAN 80-213/3(2017) : 2017 | PAINT, FINISHING, POLYURETHANE, MULTI-PACK, ANTI-SLIP, FOR LAND VEHICLES, LOW VOC |
| BS 8529:2010 | Composite doorsets. Domestic external doorsets. Specification |
| DEFSTAN 80-125/5(2017) : 2017 | PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-211/2(2011) : 2011 | PAINT, FINISHING, EPOXY, MULTI-PACK - ANTI-SLIP FOR INTERNAL USE - LOW VOC, TYPES 1, 2 AND 3 |
| DEFSTAN 80-125/4(2011) : 2011 | PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-212/3(2011) : 2011 | PAINT, FINISHING, POLYURETHANE, ABRASION RESISTING, LOW VOC, MULTI-PACK |
| DEFSTAN 80-216/2(2012) : 2012 | PAINT, FILLER, EPOXY, SPRAYING, MULTI-PACK |
| DEFSTAN 80-037/4(2017) : 2017 | PAINT, FINISHING, OIL-RESISTING TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-37/3(2011) : 2011 | PAINT, FINISHING, OIL-RESISTING - TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-215/3(2017) : 2017 | PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE |
| DEFSTAN 80-210/2(2011) : 2011 | PAINT, FINISHING, POLYURETHANE, MULTI-PACK - ANTI-SLIP FOR EXTERNAL USE - LOW VOC, TYPES 1, 2 AND 3 |
| DEFSTAN 80-124/3(2017) : 2017 | PAINT, PRIMING, DEFENCE EQUIPMENT, STOVING - TYPES: SPRAYING AND DIPPING |
| BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
| 16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| 14/30290245 DC : 0 | BS 2X35:2003 + A1 - SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
| 14/30290247 DC : 0 | BS X38:2005 + A1 - HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| BS X38(2005) : 2005 | HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| BS 2X 35(2003) : 2003 | SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
| DEFSTAN 80-97/5(2012) : 2012 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS, MULTI-PACK |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| EN 14086:2003 | Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
| DIN 1349-1:1972-06 | TRANSMISSION OF OPTICAL RADIATION; OPTICAL CLEAR (NONSCATTERING) MEDIA, QUANTITIES, SYMBOLS AND UNITS |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| ISO 7668:2010 | Anodizing of aluminium and its alloys Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.