BS EN ISO 2719:2002
Current
The latest, up-to-date edition.
Determination of flash point. Pensky-Martens closed cup method
Hardcopy , PDF
English
07-21-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Chemicals and materials
6 Apparatus
7 Apparatus preparation
8 Sampling
9 Sample handling
10 Procedure
11 Calculation
12 Expression of results
13 Precision
14 Test report
Annex A (informative) - Apparatus verification
Annex B (normative) - Pensky-Martens closed cup test
apparatus
Annex C (normative) - Temperature measuring device
specification
Bibliography
Defines three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 degrees C to 370 degrees C.
| Committee |
PTI/13
|
| DevelopmentNote |
Supersedes 98/125094 DC and BS EN 22719 Renumbers and supersedes BS 2000-34(2002) (08/2004) Also numbered as BS 2000-34(2016). Supersedes 15/30301302 DC. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 2719:2003-09 | Identical |
| ONORM EN ISO 2719 : 2016 | Identical |
| NEN EN ISO 2719 : 2016 | Identical |
| DIN EN ISO 2719:2015-07 (Draft) | Identical |
| SN EN ISO 2719 : 2016 | Identical |
| UNI EN ISO 2719 : 2005 | Identical |
| UNE-EN ISO 2719:2017 | Identical |
| I.S. EN ISO 2719:2016 | Identical |
| EN ISO 2719:2016 | Identical |
| NF EN ISO 2719 : 2003 | Identical |
| NS EN ISO 2719 : 2002 | Identical |
| ISO 2719:2016 | Identical |
| NBN EN ISO 2719 : 2003 | Identical |
| ISO 2719:2002 | Identical |
| EN ISO 2719:2002 | Identical |
| 10/30218583 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
| DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
| DEFSTAN 79-16/2(2006) : 2006 | DETERGENT SOLUTION, FOR THE CLEANING OF VEHICLES AND POWER PACKS IN PRESSURE WASHING MACHINES AND AUTOMATIC EQUIPMENT |
| DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
| DEFSTAN 91-113/2(2007) : 2007 | LUBRICATING OIL, ENGINE: SEVERE DUTY DIESEL, EXTENDED SERVICE - SAE 10W/30 NATO CODE: O-1176 JOINT SERVICE DESIGNATION: OMD-90 |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| 17/30351591 DC : 0 | BS 2869 - FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| 08/30167496 DC : DRAFT FEB 2008 | BS 148 - RECLAIMED MINERAL INSULATING OIL FOR TRANSFORMERS AND SWITCHGEAR - SPECIFICATION |
| DEFSTAN 91-22/5(2006) : 2006 | LUBRICATING OIL, DIESEL ENGINES: SEVERE SERVICE, GRADE 40 NATO CODE: O-278 JOINT SERVICE DESIGNATION: OMD-113 |
| DEFSTAN 91-111/2(2015) : 2015 | GREASE, PUMPABLE, CALCIUM BASE JOINT SERVICE DESIGNATION: XG-380 |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| DEFSTAN 91-34/3(2015) : 2015 | GREASE, SEA WATER RESISTING NATO CODE: G-460 JOINT SERVICE DESIGNATION: XG-286 |
| 11/30124825 DC : 0 | BS 7993 - TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS |
| BS 7993:2011 | Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods |
| DEFSTAN 91-22/6(2014) : 2014 | LUBRICATING OIL, DIESEL ENGINE: SEVERE SERVICE, GRADE 40 NATO CODE: O-278 JOINT SERVICE DESIGNATION: OMD-113 |
| DEFSTAN 91-38/2(2015) : 2015 | PETROLATUM, TECHNICAL JOINT SERVICE DESIGNATION: PX-6 PETROLATUM, TECHNICAL NATO CODE NO: S-743 JOINT SERVICE DESIGNATION: PX-7 |
| BS 2869:2017 | Fuel oils for agricultural, domestic and industrial engines and boilers Specification |
| BS 148:2009 | Reclaimed mineral insulating oil for transformers and switchgear. Specification |
| BS 2869(2010) : 2010 | FUEL OILS FOR AGRICULTURAL, DOMESTIC AND INDUSTRIAL ENGINES AND BOILERS - SPECIFICATION |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.