BS EN ISO 22803:2005
Current
The latest, up-to-date edition.
Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file
Hardcopy , PDF
English
01-13-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General description
5 Contents of a technical file
Bibliography
Describes the requirements for a technical file on the evaluation of the chemical, physical, mechanical, biological and clinical aspects and behaviour of membrane materials, whether resorbable, partially resorbable or non-resorbable.
| Committee |
CH/106
|
| DevelopmentNote |
Supersedes 03/101659 DC. (01/2006) Reviewed and confirmed by BSI, November 2014. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard gives the requirements for a technical file on the evaluation of the chemical, physical, mechanical, biological and clinical aspects and behaviour of membrane materials, whether resorbable, partially resorbable or non-resorbable, which are used
-
for guided tissue regeneration in oral and maxillofacial surgery to correct a morphological defect or abnormality,
-
in contact with teeth and/or dental implants,
-
for prevention of epithelial migration in periodontal surgery,
-
for the augmentation of bone prior to the planned insertion of dental implants,
-
and/or for augmentation of bone for stabilization of dental prostheses.
This International Standard is not applicable to materials whose primary intended use is to deliver a medicinal product, autografts and allografts, or materials intended to act through pharmacological, immunological or metabolic means.
| Standards | Relationship |
| NF EN ISO 22803 : 2006 | Identical |
| UNE-EN ISO 22803:2006 | Identical |
| DIN EN ISO 22803:2006-01 | Identical |
| SN EN ISO 22803 : 2005 | Identical |
| I.S. EN ISO 22803:2005 | Identical |
| NEN EN ISO 22803 : 2005 | Identical |
| UNI EN ISO 22803 : 2006 | Identical |
| EN ISO 22803:2005 | Identical |
| ISO 22803:2004 | Identical |
| NBN EN ISO 22803 : 2006 | Identical |
| NS EN ISO 22803 : 1ED 2006 | Identical |
| ISO 10993-3:2014 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 10993-13:2010 | Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices |
| ISO 1942-1:1989 | Dental vocabulary Part 1: General and clinical terms |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 14155-1:2003 | Clinical investigation of medical devices for human subjects Part 1: General requirements |
| ISO 10993-2:2006 | Biological evaluation of medical devices — Part 2: Animal welfare requirements |
| ISO 10993-14:2001 | Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| ISO/TR 14283:2004 | Implants for surgery Fundamental principles |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| ISO 10993-18:2005 | Biological evaluation of medical devices Part 18: Chemical characterization of materials |
| ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO 1942:2009 | Dentistry Vocabulary |
| ISO 10993-11:2017 | Biological evaluation of medical devices — Part 11: Tests for systemic toxicity |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 11607:2003 | Packaging for terminally sterilized medical devices |
| ISO 10993-9:2009 | Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products |
| ISO 11134:1994 | Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| EN 980:2008 | Symbols for use in the labelling of medical devices |
| ISO 10993-6:2016 | Biological evaluation of medical devices Part 6: Tests for local effects after implantation |
| ISO 15223:2000 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.