BS EN ISO 15877-5 : 2009
Current
The latest, up-to-date edition.
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
Hardcopy , PDF
English
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviated
terms
4 Fitness for purpose of the joints and the
piping system
Bibliography
Describes the characteristics of the fitness for purpose of chlorinated poly(vinyl chloride) (PVC-C) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application.
| Committee |
PRI/88/2
|
| DevelopmentNote |
Supersedes 98/122520 DC. (06/2004) Supersedes 06/30151179 DC. (07/2009) 2009 Edition Re-Issued in January 2011 & incorporates AMD 1 2010. Supersedes 09/30205715 DC. (01/2011)
|
| DocumentType |
Standard
|
| Pages |
18
|
| ProductNote |
This standard is identical to EN ISO 15877-5 : 2009
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 15877-5 : 2011 | Identical |
| I.S. EN ISO 15877-5:2009 | Identical |
| NEN EN ISO 15877-5 : 2009 AMD 1 2010 | Identical |
| SN EN ISO 15877-5 : 2009 AMD 1 2011 | Identical |
| UNI EN ISO 15877-5 : 2011 | Identical |
| ISO 15877-5:2009 | Identical |
| NS EN ISO 15877-5 : 2009 AMD 1 2010 | Identical |
| NF EN ISO 15877-5 : 2009 AMD 1 2011 | Identical |
| DIN EN ISO 15877-5:2011-03 | Identical |
| NBN EN ISO 15877-5 : 2009 AMD 1 2010 | Identical |
| UNE-EN ISO 15877-5:2009 | Identical |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| EN 12293:1999 | Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| ENV 12108:2001 | Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
| EN 12295:1999 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
| EN 12294:1999 | Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| EN 712:1993 | Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
| ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.