BS EN ISO 14555:2017
Current
The latest, up-to-date edition.
Welding. Arc stud welding of metallic materials
Hardcopy , PDF
English
07-19-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Technical review
6 Welding personnel
7 Equipment
8 Production planning
9 Welding procedure specification (WPS)
10 Welding procedure qualification
11 Examination and testing
12 Acceptance criteria
13 Workmanship
14 Process control
Annex A (informative) - Processing of stud welding
Annex B (normative) - Quality requirements for
stud welding
Annex C (informative) - Manufacturer's welding
procedure specification (WPS)
Annex D (informative) - Welding procedure qualification
record form (WPQR) (for drawn-arc stud welding
with ceramic ferrule or shielding gas and short-cycle
drawn-arc stud welding)
Annex E (informative) - Welding procedure qualification
record form (WPQR) (for capacitor discharge stud
welding with tip ignition and capacitor discharge
drawn-arc stud welding)
Annex F (informative) - Test results - Production test (for
drawn-arc stud welding with ceramic ferrule or
shielding gas and short-cycle drawn-arc stud welding)
Annex G (informative) - Test results - Production test (for
capacitor discharge stud welding with tip ignition and
capacitor discharge drawn-arc stud welding)
Annex H (informative) - Example of production surveillance
record
Bibliography
Specifies arc stud welding of metallic materials subject to static and fatigue loading.
| Committee |
WEE/36
|
| DevelopmentNote |
Supersedes 95/708318 DC. (08/2004) Supersedes 05/30114324 DC. (11/2006) Supersedes 12/30257658 DC. (05/2014) Supersedes 16/30336084 DC. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This document covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
This document is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.
NOTE General quality requirements for fusion welding of metallic materials are given in ISO3834‑1, ISO3834‑2, ISO3834‑3, ISO3834‑4 and ISO3834‑5.
This document has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction (see AnnexB). For processing of stud welding, see AnnexA.
| Standards | Relationship |
| NBN EN ISO 14555 : 2014 | Identical |
| I.S. EN ISO 14555:2017 | Identical |
| NS EN ISO 14555 : 2017 | Identical |
| UNE-EN ISO 14555:2017 | Identical |
| EN ISO 14555:2017 | Identical |
| NF EN ISO 14555 : 2017 | Identical |
| ISO 14555:2017 | Identical |
| UNI EN ISO 14555 : 2014 | Identical |
| NEN EN ISO 14555 : 2017 | Identical |
| DIN EN ISO 14555:2017-10 | Identical |
| SN EN ISO 14555 : 2017 | Identical |
| DEFSTAN 95-30/4(2011) : 2011 | FV CONSTRUCTION: AUTO STUD WELDING (STEEL) |
| DEFSTAN 02-706/3(2020):2020 | Welding & Fabrication of Ship Structure for HM Submarines and Ships not in Class |
| DEFSTAN 02-770(PT1)/3(2010) : 2010 | REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL |
| DEFSTAN 02-770(PT1)/2(2005) : 2005 | REQUIREMENTS FOR THE WELDING AND FABRICATION OF HIGH STRENGTH STEELS - PART 1: GENERAL |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| 08/30162761 DC : DRAFT AUG 2008 | BS 499-1 - WELDING TERMS AND SYMBOLS - PART 1: GLOSSARY FOR WELDING, BRAZING AND THERMAL CUTTING |
| DD ENV 1994-2:2001 | Eurocode 4. Design of composite steel and concrete structures Composite bridges (together with United Kingdom National Application Document) |
| BS PD6705-2(2010) : 2010 | STRUCTURAL USE OF STEEL AND ALUMINIUM - PART 2: RECOMMENDATIONS FOR THE EXECUTION OF STEEL BRIDGES TO BS EN 1090-2 |
| BS 499-1:2009 | Welding terms and symbols Glossary for welding, brazing and thermal cutting |
| DEFSTAN 95-30/3(2007) : 2007 | FV CONSTRUCTION: AUTO STUD WELDING |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| ISO 13918:2008 | Welding Studs and ceramic ferrules for arc stud welding |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ISO 5828:2001 | Resistance welding equipment Secondary connecting cables with terminals connected to water-cooled lugs Dimensions and characteristics |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| ISO/TR 20174:2005 | Welding Grouping systems for materials Japanese materials |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| ISO/TR 25901-3:2016 | Welding and allied processes — Vocabulary — Part 3: Welding processes |
| ISO 6947:2011 | Welding and allied processes Welding positions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.