BS EN ISO 13934-1:2013
Current
The latest, up-to-date edition.
Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method
Hardcopy , PDF
English
04-30-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Sampling
6 Apparatus
7 Atmosphere for conditioning and testing
8 Preparation of test specimen
9 Procedure
10 Calculation and expression of results
11 Test report
Annex A (informative) - Suggested procedure for sampling
Annex B (informative) - Locations of test specimens cut
from a laboratory sample
Bibliography
Defines a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.
| Committee |
TCI/100
|
| DevelopmentNote |
Supersedes BS 2576(1986) & 94/306894 DC. (11/2005)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO 13934 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.
NOTE ISO 13934-2 describes the method known as the grab method. For informative references, see Bibliography.
The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical, or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography).
The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state.
The method is restricted to the use of constant rate of extension (CRE) testing machines.
| Standards | Relationship |
| UNE-EN ISO 13934-1:2013 | Identical |
| ISO 13934-1:2013 | Identical |
| NBN EN ISO 13934-1 : 2013 | Identical |
| NS EN ISO 13934-1 : 2013 | Identical |
| DIN EN ISO 13934-1:2013-08 | Identical |
| SN EN ISO 13934-1 : 2013 | Identical |
| UNI EN ISO 13934-1 : 2013 | Identical |
| NF EN ISO 13934-1 : 2013 | Identical |
| EN ISO 13934-1:2013 | Identical |
| I.S. EN ISO 13934-1:2013 | Identical |
| NEN EN ISO 13934-1 : 2013 | Identical |
| 05/30123357 DC : DRAFT SEP 2005 | BS 8504-2 - BEACH SAFETY FLAGS - PART 2: MATERIALS |
| BS PAS 1008(2014) : 2014 | SPECIFICATION FOR THE PERFORMANCE AND TESTING OF A SINGLE-USE FLEXITANK |
| BS 8467:2006 | Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| BS 5815-1:2005 | Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector Specification for sheeting, sheets and pillowslips |
| 02/123368 DC : DRAFT AUG 2002 | BS 5815-1 - SHEETS, SHEETING, PILLOWSLIPS, TOWELS, NAPKINS, COUNTERPANES AND CONTINENTAL QUILT SECONDARY COVERS SUITABLE FOR USE IN THE PUBLIC SECTOR - PART 1: SPECIFICATION FOR SHEETING, SHEETS AND PILLOWSLIPS |
| DEFSTAN 68-141/3(2004) : 2004 | PERFORMANCE REQUIREMENTS FOR TEXTILE PRESERVATIVE TREATMENTS AGAINST MICROBIOLOGICAL ATTACK |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 83-34/4(2000) : 2000 | CLOTHS, WOOL, WORSTED AND CLOTHS, WOOL, WORSTED/COTTON |
| BS 7971-10:2004 | Protective clothing and equipment for use in violent situations and in training Coveralls. Requirements and test methods |
| DEFSTAN 83-65/4(2002) : 2002 | CLOTHS, POLYESTER AND COTTON BLENDS |
| DEFSTAN 02-129/2(2007) : 2007 | REQUIREMENTS FOR SOFT FURNISHINGS AND UPHOLSTERY FABRICS |
| BS 4060:2006 | Pressed wool felts. Specification |
| 13/30287913 DC : 0 | BS 7971-10 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 10: COVERALLS - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 83-48/4(2003) : 2003 | CLOTHS, PLAIN WEAVE, COTTON |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| BS 7971-10:2014 | Protective clothing and equipment for use in violent situations and in training Coveralls. Requirements and test methods |
| DEFSTAN 83-45/3(2006) : 2006 | CLOTH, SILK, TYPE QX |
| DEFSTAN 83-22/4(2000) : 2000 | CLOTHS, TARTAN, WOOL |
| BS 8504-2:2006 | Beach safety flags Materials. Requirements and test methods |
| DEFSTAN 83-72/3(2001) : 2001 | CLOTHS, WOOL AND POLYESTER BLENDS |
| DEFSTAN 83-27/3(2000) : 2000 | CLOTHS, DUCK, COTTON AND CLOTHS, CANVAS, COTTON |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| ISO 9073-3:1989 | Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation |
| ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 4606:1995 | Textile glass Woven fabric Determination of tensile breaking force and elongation at break by the strip method |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 13935-1:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.