BS EN ISO 11252:2013
Current
The latest, up-to-date edition.
Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
Hardcopy , PDF
English
11-30-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Units
5 Technical data sheet
6 Information for the user
7 Marking and labelling
Annex A (informative) - Model of technical data sheet
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
(Machinery)
Defines the minimum documentation, marking and labelling for all laser products classified in accordance with IEC 60825-1 including laser diodes and all laser devices defined in ISO 11145.
| Committee |
CPW/172
|
| DevelopmentNote |
Supersedes BS EN 31252 and 03/314745 DC. (12/2004)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies the minimum documentation, marking and labelling for all laser products classified in accordance with IEC 60825-1 including laser diodes and all laser devices defined in ISO 11145.
It is applicable to laser systems being integrated in a laser product in accordance with IEC 60825-1 and laser devices being integrated in a laser unit or processing machine in accordance with ISO 11553-1 and ISO 11553-2.
This International Standard is not applicable to (ready-to-use) complete laser products, embedded laser products without external laser emission by means of protective enclosure or laser processing machines that incorporate a laser device.
This International Standard is not applicable to incoherent lamps and other similar sources such as LEDs that are required to comply with IEC 62471.
This International Standard specifies requirements for technical data sheets (see Clause 5) and information for the user (see Clause 6).
The requirements in this International Standard augment but do not supersede any of the requirements in IEC 60825-1.
NOTE 1 The provision of technical data and safety information is an integral part of a product and is essential for its safe use. The documentation covers the whole life cycle, transport, assembly, system integration, normal operation, maintenance, service, decommissioning and disposal.
NOTE 2 For incomplete (not ready-to-use) machines, the manufacturer/supplier is responsible for the documentation with regard to all components provided by him.
| Standards | Relationship |
| NS EN ISO 11252 : 2013 | Identical |
| I.S. EN ISO 11252:2013 | Identical |
| NBN EN ISO 11252 : 2013 | Identical |
| DIN EN ISO 11252:2014-02 | Identical |
| SN EN ISO 11252 : 2013 | Identical |
| NF EN ISO 11252 : 2013 | Identical |
| UNE-EN ISO 11252:2013 | Identical |
| NEN EN ISO 11252 : 2013 | Identical |
| ISO 11252:2013 | Identical |
| UNI EN ISO 11252 : 2013 | Identical |
| EN ISO 11252:2013 | Identical |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| 08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| ISO 11146-1:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1: Stigmatic and simple astigmatic beams |
| ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
| ISO 11146-2:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2: General astigmatic beams |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 11670:2003 | Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 15367-1:2003 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and fundamental aspects |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 13695:2004 | Optics and photonics — Lasers and laser-related equipment — Test methods for the spectral characteristics of lasers |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 17526:2003 | Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| ISO 12005:2003 | Lasers and laser-related equipment Test methods for laser beam parameters Polarization |
| ISO 15367-2:2005 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 2: Shack-Hartmann sensors |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| ISO 11553-2:2007 | Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 11553-3:2013 | Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.