BS EN ISO 1119:2011
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS). Series of conical tapers and taper angles
Hardcopy , PDF
English
01-31-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Values
Annex A (informative) - Relation to the GPS matrix model
Bibliography
Defines calculated values for a series of cones or conical tapers, ranging from 120 degrees to less than 1 degree, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
| Committee |
TPR/1
|
| DevelopmentNote |
Supersedes 10/30209612 DC. (01/2012)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard provides calculated values for a series of cones or conical tapers, ranging from 120° to less than 1°, or ratios from 1:0,289 to 1:500, intended for general use in technical engineering.
It applies only to plain conical surfaces, and excludes prismatic pieces, taper threads, bevel gears, etc.
| Standards | Relationship |
| UNI EN ISO 1119 : 2012 | Identical |
| NEN EN ISO 1119 : 2011 | Identical |
| NBN EN ISO 1119 : 2012 | Identical |
| I.S. EN ISO 1119:2011 | Identical |
| UNE-EN ISO 1119:2012 | Identical |
| EN ISO 1119:2011 | Identical |
| NF EN ISO 1119 : 2012 | Identical |
| DIN EN ISO 1119:2012-04 | Identical |
| NS EN ISO 1119 : 2011 | Identical |
| ISO 1119:2011 | Identical |
| SN EN ISO 1119 : 2012 | Identical |
| BS 8888:2008 | Technical product specification. Specification |
| BS 8888:2011 | Technical product documentation and specification |
| 13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| 16/30334592 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| BS 4500:2009 | Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| 11/30234091 DC : DRAFT JULY 2011 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| 09/30192596 DC : 0 | BS 4500 - LIMITS AND FITS - GUIDANCE FOR SYSTEM OF CONE (TAPER) FITS AND TOLERANCES FOR CONES FROM C = 1:3 TO 1:500, LENGTHS FROM 6 MM TO 630 MM AND DIAMETERS UP TO 500 MM |
| BS 8888:2004 | Technical product specification (TPS). Specification |
| BIP 3016 : 2004 | BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM |
| BS 8888:2017 | Technical product documentation and specification |
| BS 8888:2006 | Technical product specification (TPS). Specification |
| BS 8888:2013 | Technical product documentation and specification |
| ISO 8489-4:1995 | Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 5237:1978 | Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 5 degrees 57' |
| ISO 297:1988 | 7/24 tapers for tool shanks for manual changing |
| ISO 8489-5:1995 | Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57' |
| ISO 595-2:1987 | Reusable all-glass or metal-and-glass syringes for medical use Part 2: Design, performance requirements and tests |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
| ISO 8489-3:1995 | Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' |
| ISO 296:1991 | Machine tools — Self-holding tapers for tool shanks |
| ISO 595-1:1986 | Reusable all-glass or metal-and-glass syringes for medical use Part 1: Dimensions |
| ISO 8489-2:1995 | Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30' |
| IEC 60095-2:2009 | Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals |
| ISO 575:1978 | Textile machinery and accessories Transfer cones Half angle of the cone 4 degrees 20' |
| ISO 324:1978 | Textile machinery and accessories Cones for cross winding for dyeing purposes Half angle of the cone 4 degrees 20' |
| ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
| ISO 239:1999 | Drill chuck tapers |
| ISO 368:2006 | Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.