BS EN ISO 10472-3:2008
Current
The latest, up-to-date edition.
Safety requirements for industrial laundry machinery Washing tunnel lines including component machines
Hardcopy , PDF
English
05-31-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the hazards
identified in clause 4
5.1 General
5.2 Mechanical hazards
5.2.1 Interface between loading system and
continuous tunnel washing machine
5.2.2 Continuous tunnel washing machine
5.2.3 Conveyors between washing machine and squeeze
press or centrifugal extraction machine
5.2.4 Squeeze press
5.2.5 Centrifugal extraction machine
5.2.6 Transfer conveyor system
5.2.7 Automatic transfer tumbler dryers
5.2.8 Interface between tumbler dryers and unloading
system
5.3 Electrical hazards
5.4 Thermal hazards
5.5 Hazards generated by noise
5.6 Hazards associated with materials and substances
5.6.1 Fire and explosion
5.6.2 Biological hazards
5.7 Failure of control systems
5.8 Hazards associated with complex installations
6 Verification of safety requirements and/or measures
7 Information concerning machine use
7.1 Instruction handbook
7.2 Warning signs
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Describes most significant hazards associated with washing tunnel lines including component machines.
| Committee |
TCI/33
|
| DevelopmentNote |
Supersedes 95/111461 DC. (08/2004)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 10472-3:2008 | Identical |
| NF EN ISO 10472-3 : 2009 | Identical |
| UNI EN ISO 10472-3 : 2009 | Identical |
| DIN EN ISO 10472-3:2009-10 | Identical |
| NEN EN ISO 10472-3 : 2008 | Identical |
| NS EN ISO 10472-3 : 2ED 2008 | Identical |
| EN ISO 10472-3:2008 | Identical |
| UNE-EN ISO 10472-3:2009 | Identical |
| ISO 10472-3:1997 | Identical |
| SN EN ISO 10472-3 : 2009 | Identical |
| NBN EN ISO 10472-3 : 2009 | Identical |
| PD 5304:2005 | GUIDANCE ON SAFE USE OF MACHINERY |
| PD 5304:2000 | SAFE USE OF MACHINERY |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| ISO 6182-1:2014 | Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.