BS EN ISO 10472-1:2008
Current
The latest, up-to-date edition.
Safety requirements for industrial laundry machinery Common requirements
Hardcopy , PDF
English
05-31-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Significant hazards connected with most industrial
laundry machinery
5 Safety requirements and/or measures for the hazards
identified in clause
5.1 Mechanical hazards
5.1.1 Escape and rescue of trapped persons
5.1.2 Guards and safety devices
5.1.3 Fault-finding, cleaning or maintenance
5.1.4 Complex installation
5.2 Electrical hazards
5.3 Thermal hazards
5.4 Hazards generated by noise
5.5 Hazards associated with materials and substances
5.5.1 Contact with or inhalation of harmful fluids,
gases, mists, fumes and dusts
5.5.2 Fire and explosion
5.5.3 Decomposition of substances
5.5.4 Biological hazards
5.6 Hazards due to neglect of ergonomic principles
in machine design
5.7 Failure of energy supply and control systems
5.7.1 Failure of energy supply
5.7.2 Failure of control systems
5.8 Hazards arising during maintenance and/or elimination
of process faults
6 Verification of safety requirements and/or measures
7 Information concerning machine use
7.1 Instruction handbook
7.2 Warning signs
Annexes
A (normative) - Additional specification for fence guards
B (informative) - Layouts of plants
C (informative) - Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Specifies all significant hazards associated with laundry machinery designed for use in industrial laundry premises, which includes hotels, hospitals, nursing homes, prisons and similar premises, as well as machines designed for use in self-service establishments subject to the minimum capacities stated in the separate parts of ISO 10472.
| Committee |
TCI/33
|
| DevelopmentNote |
Supersedes 95/100460 DC. (08/2004)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 10472-1:1997 | Identical |
| SN EN ISO 10472-1 : 2009 | Identical |
| I.S. EN ISO 10472-1:2008 | Identical |
| EN ISO 10472-1:2008 | Identical |
| UNI EN ISO 10472-1 : 2009 | Identical |
| NBN EN ISO 10472-1 : 2009 | Identical |
| NF EN ISO 10472-1 : 2009 | Identical |
| UNE-EN ISO 10472-1:2009 | Identical |
| DIN EN ISO 10472-1:2009-10 | Identical |
| NS EN ISO 10472-1 : 2ED 2008 | Identical |
| NEN EN ISO 10472-1 : 2008 | Identical |
| PD 5304:2005 | GUIDANCE ON SAFE USE OF MACHINERY |
| PD 5304:2000 | SAFE USE OF MACHINERY |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| ISO 9004-1:1994 | Quality management and quality system elements Part 1: Guidelines |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
| ISO 9398-2:2003 | Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 2: Batch drying tumblers |
| EN 264 : 1991 | SAFETY SHUT OFF DEVICES FOR COMBUSTION PLANTS USING LIQUID FUELS - SAFETY REQUIREMENTS AND TESTING |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 9398-1:2003 | Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| ISO 5232:1998 | Graphical symbols for textile machinery |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| IEC 60335-2-44:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60335-2-7:2008+AMD1:2011+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-7:Particular requirements for washing machines |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 10472-2:1997 | Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| ISO 10472-6:1997 | Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| ISO 10472-4:1997 | Safety requirements for industrial laundry machinery Part 4: Air dryers |
| ISO 447:1984 | Machine tools Direction of operation of controls |
| ISO 10472-5:1997 | Safety requirements for industrial laundry machinery Part 5: Flatwork ironers, feeders and folders |
| ISO 13853:1998 | Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
| EN 50081-2:1993 | Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment |
| IEC 60801-1:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction |
| EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| EN 230:2005 | Automatic burner control systems for oil burners |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| ISO 9398-3:2003 | Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 3: Washing tunnels |
| EN 88:1991/A1:1996 | PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 9398-4:2003 | Specifications for industrial laundry machines Definitions and testing of capacity and consumption characteristics Part 4: Washer-extractors |
| ISO 10472-3:1997 | Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines |
| EN 457 : 1992 | SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 9000-1:1994 | Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.