BS EN 62329-2:2006
Current
The latest, up-to-date edition.
Heat shrinkable moulded shapes Methods of test
Hardcopy , PDF
English
11-30-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Test conditions
4 Standard test specimens
4.1 Moulded shape material specimens
4.2 Moulded shape compatibility specimens
5 Dimensions
5.1 Number of test specimens
5.2 Procedure
5.3 Result
6 Density
6.1 Number of test specimens
6.2 Procedure
6.3 Report
6.4 Result
7 Heat shock
7.1 Number of test specimens
7.2 Form of test specimens
7.3 Procedure
7.4 Report
7.5 Result
8 Bending at low temperature
8.1 Number and form of test specimens
8.2 Procedure
8.3 Result
9 Dimensional stability on storage
9.1 Number of test specimens
9.2 Procedure
9.3 Result
10 Tensile strength and elongation at break
10.1 Number and form of test specimens
10.2 Conditioning
10.3 Test temperature
10.4 Procedure
10.5 Calculations
10.7 Result
11 Secant modulus at 2% elongation
11.1 Number and form of test specimens
11.2 Procedure
11.3 Calculation
11.4 Report
11.5 Result
12 Electric strength
12.1 Number and form of test specimens
12.2 Conditioning
12.3 Electrodes
12.4 Procedure
12.5 Result
12.6 Result
13 Volume resistivity after damp heat
13.1 Number and form of test specimens
13.2 Electrodes
13.3 Procedure
13.4 Result
14 Permittivity and dissipation factor
14.1 Number and form of test specimens
14.2 Electrodes
14.3 Procedure
14.4 Calculation
14.5 Result
15 Resistance to tracking
15.1 Report
15.2 Result
16 Flammability
16.1 Number and form of test specimens
16.2 Procedure
16.3 Result
17 Oxygen index
17.1 Oxygen index at ambient temperature
17.2 Oxygen index at elevated temperature
18 Copper corrosion (presence of corrosive volatiles)
18.1 Principle
18.2 Apparatus
18.3 Number and form of test specimens
18.4 Procedure
18.5 Report
18.6 Result
19 Colour fastness to light
19.1 Principle
19.2 Test specimen
19.3 Procedure
19.4 Result
20 Resistance to selected fluids
20.1 Principle
20.2 Choice of fluid
20.3 Methods of assessment
20.4 Number and form of test specimens
20.5 Procedure
20.6 Result
21 Long term heat ageing (3000 h)
21.1 Number and form of test specimens
21.2 Procedure
21.3 Report
21.4 Result
22 Mass
22.1 Number of test specimens
22.2 Procedure
22.3 Result
23 Heat ageing
23.1 Number and form of test specimens
23.2 Procedure
24 Water absorption
25 Colour stability to heat
25.1 Number of test specimens
25.2 Form of test specimens
25.3 Procedure
25.4 Report
25.5 Result
26 Smoke index
26.1 Definitions
26.2 Principle
26.3 Apparatus
26.4 Number and form of test specimen
26.5 Conditioning
26.6 Mounting of test pieces
26.7 Safety of operations
26.8 Procedure
26.9 Calculation of results
27 Toxicity index
27.1 Definition
27.2 Principle
27.3 Apparatus
27.4 Conditioning
27.5 Safety of operations
27.6 Test procedure
27.7 Calculation of toxicity index
27.8 Toxic constituents
27.9 Values for C[f]
27.10 Result and report
28 Halogen content
28.1 Method for the determination of low levels of
chlorine and/or bromine and/or iodine
28.2 Determination of low levels of fluorine
29 Acid gas generation
30 Resistance to mould growth
31 Compatibility
31.1 Dynamic shear at room temperature
31.2 Static load
31.3 Fluid resistance
31.4 Thermal ageing
31.5 Peel adhesion
31.6 Altitude immersion
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Gives methods of test for heat-shrinkable moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions.
| Committee |
GEL/15/5
|
| DevelopmentNote |
Supersedes 03/303227 DC (12/2006)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
IEC 62329-2:2006 gives methods of test for heat-shrinkable moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they do not completely establish the suitability of moulded shapes for impregnation or encapsulation processes or other specialized applications.
| Standards | Relationship |
| I.S. EN 62329-2:2006 | Identical |
| NBN EN 62329-2 : 2007 | Identical |
| IEC 62329-2:2006 | Identical |
| NF EN 62329-2 : 2006 | Identical |
| DIN EN 62329-2 : 2007 | Identical |
| EN 62329-2:2006 | Identical |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| ISO 4589-3:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
| EN 62329-1:2006/corrigendum:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| ISO 3261:1975 | Fire tests — Vocabulary |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| IEC 60216-4-2:2000 | Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C |
| IEC 60216-4-1:2006 | Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens |
| ISO 105-B01:2014 | Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight |
| IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| IEC 62329-1:2005 | Heat shrinkable moulded shapes - Part 1: Definitions and general requirements |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| ISO 62:2008 | Plastics Determination of water absorption |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| IEC 60587:2007 | Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| HD 602 : 200S1 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY |
| EN ISO 105-B01:2014 | Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014) |
| EN ISO 4589-3:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.