BS EN 62011-2:2004
Current
The latest, up-to-date edition.
Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test
Hardcopy , PDF
English
04-30-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Conditioning
4 Dimensions
4.1 External dimensions
4.2 Internal dimensions
4.3 Wall thickness
4.4 Departure from straightness - Applicable to all
tubes and rods
5 Mechanical tests
5.1 Flexural strength perpendicular to laminations
(rods only)
5.2 Axial compressive strength (tubes only)
6 Electrical tests
6.1 General
6.2 Insulation resistance after immersion in water
7 Other tests
7.1 Water absorption
7.2 Density
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Bibliography
Describes the test methods for industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes.
| Committee |
GEL/15
|
| DevelopmentNote |
Supersedes 99/240503 DC. (05/2004) Together with BS EN 62011-1 and BS EN 62011-3-1 supersedes BS 6128-4(1981). (05/2008)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 62011-2 : 2005 | Identical |
| EN 62011-2:2004 | Identical |
| NF EN 62011-2 : 2004 | Identical |
| IEC 62011-2:2004 | Identical |
| UNE-EN 62011-2:2004 | Identical |
| DIN EN 62011-2 : 2004 | Identical |
| I.S. EN 62011-2:2004 | Identical |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 62011-1:2002 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| HD 437 : 200S1 | STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS |
| IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| HD 568 : 200S1 | METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF SOLID INSULATING MATERIALS |
| EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
| IEC 61212-1:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| ISO 178:2010 | Plastics Determination of flexural properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.