BS EN 61784-3-12:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12
Hardcopy , PDF
02-05-2020
English
09-30-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
0 Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms
and conventions
4 Overview of FSCP 12/1 (Safety-over EtherCAT[TM])
5 General
6 Safety communication layer services
7 Safety communication layer protocol
8 Safety communication layer management
9 System requirements
10 Assessment
Annex A (informative) - Additional information for
functional safety communication profiles of
CPF 12
Annex B (informative) - Information for assessment of
the functional safety communication profiles
of CPF 12
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Defines safety communication layer (services and protocol) based on CPF 12 of IEC 61784-2 and IEC 61158 Type 12. It also defines the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
| Committee |
GEL/65/3
|
| DocumentType |
Standard
|
| Pages |
102
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
IEC 61784-3-12:2010 specifies a safety communication layer (services and protocol) based on CPF 12 of IEC 61784-2 and IEC 61158 Type 12. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-06.
| Standards | Relationship |
| IEC 61784-3-12:2010 | Identical |
| EN 61784-3-12:2010 | Identical |
| EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| IEC 61326-3-2:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| EN 61784-3:2016/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017) |
| IEC TR 62210:2003 | Power system control and associated communications - Data and communication security |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
| EN 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| EN 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
| IEC 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
| IEC 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
| IEC 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
| IEC 62280-2:2002 | Railway applications - Communication, signalling and processing systems - Part 2: Safety-related communication in open transmission systems |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| ISO 14121:1999 | Safety of machinery Principles of risk assessment |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| EN 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
| ISO/IEC 2382-16:1996 | Information technology Vocabulary Part 16: Information theory |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC TR 62059-11:2002 | Electricity metering equipment - Dependability - Part 11: General concepts |
| EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 62280-1:2002 | Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
| EN 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| IEC 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications |
| IEC 61784-3:2016+AMD1:2017 CSV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
| IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.