BS EN 61599:2000

1 General
      1.1 Scope
      1.2 Normative references
      1.3 Terms and definitions
      1.4 Abbreviations
2 Information required from manufacturers of videodisk
      players
      2.1 Identification
      2.2 Standard conditions for measurement
      2.3 Performance claims
      2.4 Additional considerations
3 Power consumption
4 Video characteristics
      4.1 General
      4.2 Video output level
      4.3 Luminance amplitude/frequency response
      4.4 Luminance non-linear distortion
      4.5 Luminance waveform distortion (linear
             distortion)
      4.6 Luminance signal-to-noise ratio
      4.7 Chrominance amplitude/frequency response
             (applicable for VHD systems only)
      4.8 Chrominance signal-to-noise ratio
      4.9 Differential gain (DG)
      4.10 Differential phase (DP)
      4.11 Cross-talk from adjacent tracks
      4.12 Drop-out
5 Time base error
6 Audio characteristics
7 Control characteristics
      7.1 Test conditions - General
      7.2 Radio serve error
      7.3 Focus servo error (applicable to LV systems
             only)
      7.4 Access time
Annex A (informative) Examples of available test disks
Annex B (informative) Contents of REF-V3 test disk (12
                      inch CAV)
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications
Figure 1 - Video test signal: nominal values, horizontal
           line
Figure 2 - Test signal for luminance non-linear distortion
           (10 steps)
Figure 3 - Test signal for luminance signal-to-noise ratio
Figure 4 - Test signal for chrominance signal-to-noise ratio
Figure 5 - Cross-talk pattern for LV systems
Figure 6 - Measurement of drop-out compensation level and
           switching noise
Figure 7 - Measurement of frequency characteristics and time
           behaviour of drop-out compensation

Applies to reproducing equipment for videodisks for home use. Defines and lists the characteristics that affect the performance of videodisk players, establishes conditions and measurement methods of those characteristics, and standardizes the presentation of results. Does not apply to specify limiting values of the various quantities for acceptable performances. Measurement methods are intended to make it possible to assess the performance of the complete player.

IEC 60721-4-1:2001+A1:2003 Deals with the correlation and transformation of the condition given in IEC 60721-3-1 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic, and biological and other effects, due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of easy-to-use tables which correlate and transform these conditions. It has the status of a horizontal standard in accordance with IEC Guide 104. This consolidated version consists of the first edition (2001) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.