BS EN 61241-17:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines)
Hardcopy , PDF
10-31-2007
English
08-10-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Documentation
4.2 Qualification of personnel
4.3 Inspections
4.4 Regular periodic inspections
4.5 Continuous supervision by skilled persons
4.6 Maintenance requirements
4.7 Environmental conditions
4.8 Isolation of apparatus
4.9 Earthing and equipotential bonding
4.10 Conditions of use
4.11 Movable apparatus and its connections
4.12 Inspection schedules (Tables 1 to 3)
5 Additional inspection schedule requirements
5.1 Type of protection "iD" - Intrinsic safety
5.2 Type of protection "pD" - Pressurized enclosure
5.3 Apparatus used in zone 22
5.4 Types of protection "mD" (encapsulation)
6 Typical inspection schedules
Annex A (informative) Typical inspection procedure for
periodic inspections
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only.
| Committee |
EXL/31
|
| DevelopmentNote |
Together with BS EN 61241-14, it supersedes BS EN 50281-1-2. Supersedes 02/204779 DC (08/2005) Together with BS EN 61241-0, BS EN 61241-1 and BS EN 61241-14, it supersedes BS 6467-1(1985) and BS 6467-2(1988). (01/2007)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This part of IEC 61241 is intended to be applied by users and covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only. It does not include conventional requirements for electrical installations, nor the testing and certification of electrical apparatus. This standard supplements the requirements laid down in IEC 60364-6-61. NOTE: The text is based on IEC 60079-17
| Standards | Relationship |
| DIN EN 61241-17 : 2006 | Identical |
| IEC 61241-17:2005 | Identical |
| I.S. EN 61241-17:2005 | Identical |
| NBN EN 61241-17 : 2006 | Identical |
| EN 61241-17:2005 | Identical |
| UNE-EN 61241-17:2006 | Identical |
| NF EN 61241-17 : 2005 | Identical |
| BS 7671(2008) : 2018 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS 5839-8:2008 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems |
| BS 5839-8:2013 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems |
| BS 6701(2016) : 2016 | TELECOMMUNICATIONS EQUIPMENT AND TELECOMMUNICATIONS CABLING - SPECIFICATION FOR INSTALLATION, OPERATION AND MAINTENANCE |
| BS 6701:2010 | Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance |
| 09/30202584 DC : DRAFT OCT 2009 | BS 6701 - TELECOMMUNICATIONS EQUIPMENT AND TELECOMMUNICATIONS CABLING - SPECIFICATION FOR INSTALLATION, OPERATION AND MAINTENANCE |
| 12/30258718 DC : 0 | BS 5839-8 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 8: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF VOICE ALARM SYSTEMS |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| IEC 61241-11:2005 | Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD' |
| EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| IEC 61241-18:2004 | Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD' |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60364-6-61:2001 | Electrical installations of buildings - Part 6-61: Verification - Initial verification |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 61241-4:2001 | Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| IEC 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| IEC 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.