BS EN 61032:1998
Current
The latest, up-to-date edition.
Protection of persons and equipment by enclosures. Probes for verification
Hardcopy , PDF
English
06-21-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 General
1.1 Scope and object
1.2 General recommendations
2 Normative references
3 Definitions
3.1 Enclosure
3.2 Hazardous part
3.3 Access probe
3.4 Object probe
3.5 IP code probe
3.6 Other probe
3.7 Adequate clearance for protection against access
to hazardous parts
4 Classification of test probes
5 List of test probes
6 Test probes
6.1 IP code probes
6.2 Other access probes
7 Design characteristics of test probes
Annexes
A Effect of tolerances of test probes on equipment and
test results
B Rules for tolerancing of test probes
ZA Normative references to international publications with
their corresponding European publications
Gives details and dimensions of test probes intended to verify the protection provided by enclosure with regard to: a) protection of persons against access to hazardous parts inside the enclosure. b) protection of equipment inside the enclosure against ingress of solid foreign objects.
| Committee |
GEL/70
|
| DevelopmentNote |
Also numbered as IEC 61032 Supersedes BS 3042(1992) & 95/205890 DC (07/2003) Reviewed and confirmed by BSI, October, 2004. (11/2004)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 61032:1997/COR1:2003 | Identical |
| EN 50123-2:2003 | Identical |
| NBN EN 61032 : 1998 | Identical |
| I.S. EN 61032:2001 | Identical |
| SN EN 61032 : 1998 | Identical |
| NF EN 61032 : 1998 | Identical |
| UNE-EN 61032:1998 | Identical |
| DIN EN 61032 : 1998 | Identical |
| EN 61032:1998 | Identical |
| BS 5266-5:1999 | Emergency lighting Specification for component parts of optical fibre systems |
| 09/30202852 DC : 0 | BS 5733 - GENERAL REQUIREMENTS FOR ELECTRICAL ACCESSORIES - SPECIFICATION |
| BS 1363-5:2008 | 13 A plugs, socket-outlets, adaptors and connection units Specification for fused conversion plugs |
| DEFSTAN 61-5(PT2)SEC2/2(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - GROUND GENERATING SET CHARACTERISTICS - GENERAL DESIGN REQUIREMENTS |
| DEFSTAN 02-309/3(2007) : 2007 | REQUIREMENTS FOR GAS TURBINES |
| DEFSTAN 02-309/2(2002) : 2002 | REQUIREMENTS FOR GAS TURBINES |
| BS 1363-4(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
| BS 5991:2006 | Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| BS 1363-1:2016+A1:2018 | 13 A plugs, socket-outlets, adaptors and connection units Specification for rewirable and non-rewirable 13 A fused plugs |
| BS 1363-3(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 3: SPECIFICATION FOR ADAPTORS |
| BS 5990:2006 | Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases) |
| 15/30297234 DC : 0 | BS 1363-2 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
| 15/30297238 DC : 0 | BS 1363-4 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 4: SPECIFICATION FOR 13 A FUSED CONNECTION UNITS SWITCHED AND UNSWITCHED |
| 15/30297236 DC : 0 | BS 1363-3 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 3: SPECIFICATION FOR ADAPTORS |
| BS 8488-1(2009) : 2009 | PREFABRICATED WIRING SYSTEMS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS - PART 1: SPECIFICATION |
| 15/30297232 DC : 0 | BS 1363-1 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS |
| BS 8488(2009) : 2009 | PREFABRICATED WIRING SYSTEMS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS - SPECIFICATION |
| BS 1363-1(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 1: SPECIFICATION FOR REWIRABLE AND NON-REWIRABLE 13 A FUSED PLUGS |
| BS 1363-2(1995) : 1995 | 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 2: SPECIFICATION FOR 13 A SWITCHED AND UNSWITCHED SOCKET-OUTLETS |
| BS 6396(2008) : 2008 | ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND EDUCATIONAL FURNITURE - SPECIFICATION |
| BS 6396:2008+A1:2015 | Electrical systems in office furniture and educational furniture. Specification |
| BS 6396:2002 | Electrical systems in office furniture and office screens. Specification |
| 08/30147373 DC : DRAFT AUG 2008 | BS 8488-1 - PRE-FABRICATED WIRING SYSTEMS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS - PART 1: SPECIFICATION |
| BS 7288:2016 | Specification for residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| 15/30297240 DC : 0 | BS 1363-5 - 13 A PLUGS, SOCKET-OUTLETS, ADAPTORS AND CONNECTION UNITS - PART 5: SPECIFICATION FOR FUSED CONVERSION PLUGS |
| 08/30177004 DC : DRAFT JULY 2008 | BS 6396 - ELECTRICAL SYSTEMS IN OFFICE FURNITURE AND OFFICE SCREENS - SPECIFICATION |
| BS 5733(2010) : 2010 | GENERAL REQUIREMENTS FOR ELECTRICAL ACCESSORIES - SPECIFICATION |
| HD 366 : 200S1 | CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO PROTECTION AGAINST ELECTRIC SHOCK |
| HD 384.2 : 200S2 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - ELECTRICAL INSTALLATIONS OF BUILDINGS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.