BS EN 60794-2-41:2008
Current
The latest, up-to-date edition.
Optical fibre cables Indoor cables. Product specification for simplex and duplex buffered A4 fibres
01-31-2009
1 Scope
2 Normative references
3 Construction
3.1 General
3.2 Optical fibres
3.3 Buffer
3.4 Strength and anti-buckling members
3.5 Ripcord
3.6 Sheath
3.7 Marking
3.8 Identification
3.9 Examples of constructions
4 Dimensions
5 Tests
5.1 General
5.2 Dimensions
5.3 Mechanical requirements
5.3.1 General
5.3.2 Tensile performance
5.3.3 Crush
5.3.4 Impact
5.3.5 Bend
5.3.6 Repeated bending
5.3.7 Bend at low temperature
5.3.8 Flexing
5.3.9 Torsion
5.3.10 Kink
5.4 Environmental requirements
5.4.1 Mechanical environmental requirement
5.4.2 Transmission environmental requirements
5.5 Transmission requirements
5.6 Fire performance
Annex A (informative) - Blank detail specification
Bibliography
Annex ZA (normative) - Normative references to
international publications
with their corresponding
European publications
Describes simplex and duplex buffered A4a through A4g fibres for indoor use.
| Committee |
GEL/86/1
|
| DevelopmentNote |
Supersedes 05/30139166 DC. (02/2009)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
IEC 60794-2-41:2008 covers simplex and duplex buffered A4a through A4g fibres for indoor use. These may be cut into short lengths, which can be used in patchcord cable assemblies. The requirements of sectional specification IEC 60794-2 are applicable to cables covered by this standard. Keywords: A4a through A4g fibres, patchcord cable assemblies
This publication is to be read in conjunction with IEC 60794-1-1:2011, IEC 60794-1-2:2013 and IEC 60794-2:2002.
| Standards | Relationship |
| EN 60794-2-41 : 2008 | Identical |
| IEC 60794-2-41:2008 | Identical |
| EN 60793-1-46:2002 | Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance |
| IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV | Classification of environmental conditions - Part 1: Environmental parameters and their severities |
| IEC 60654-4:1987 | Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences |
| EN 60793-1-21:2002 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| EN 60793-1-20:2014/AC:2016-03 | OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY (IEC 60793-1-20:2014/COR1:2016) |
| EN 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| IEC 60793-1-41:2010 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60793-1-52:2014 | Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests |
| IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
| ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
| IEC 60793-1-50:2014 | Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-2-40:2016 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
| IEC 60793-2-40:2015 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
| EN 61326:1997/A3:2003 | |
| EN 60654-4:1997 | Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influences |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60793-1-51:2014 | Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests |
| EN 60793-1-50:2015 | Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| IEC 60793-1-46:2001 | Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60794-2-40:2008 | Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables |
| IEC 60793-1-21:2001 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| EN 60793-1-52:2014 | Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests |
| EN 60793-1-51:2014 | Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests |
| EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
| EN 60793-1-41:2010 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| IEC 60793-1-20:2014 | Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry |
| EN 60721-1:1995/A2:1995 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES |
| EN 60794-2-40:2008 | Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables |
| EN 60721-3-3 : 95 AMD 2 97 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.