BS EN 60747-5-2:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Discrete semiconductor devices and integrated circuits. Optoelectronic devices Essential ratings and characteristics
Hardcopy , PDF
06-30-2015
English
01-17-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Light-emitting diodes (excluding devices for fibre
optic systems or subsystems)
3.1 Type
3.2 Semiconductor material
3.3 Colour
3.4 Details of outline and encapsulation
3.5 Limiting values (absolute maximum system)
3.6 Electrical characteristics
3.7 Supplementary information
4 Infrared-emitting diodes (excluding devices for fibre
optic systems or subsystems)
4.1 Type
4.2 Semiconductor material
4.3 Details of outline and encapsulation
4.4 Limiting values (absolute maximum system)
4.5 Electrical characteristics
4.6 Supplementary information
5 Photodiodes (excluding devices for fibre optic systems or
subsystems)
5.1 Type
5.2 Semiconductor material
5.3 Details of outline and encapsulation
5.4 Limiting values (absolute maximum system)
5.5 Electrical characteristics
5.6 Supplementary information
6 Phototransistors (excluding devices for fibre optic
systems or subsystems)
6.1 Type
6.2 Semiconductor material
6.3 Polarity
6.4 Details of outline and encapsulation
6.5 Limiting values (absolute maximum system)
6.6 Electrical characteristics
6.7 Supplementary information
7 Photocouplers, optocouplers (with output transistor)
7.1 Type
7.2 Semiconductor material
7.3 Polarity of the output resistor
7.4 Details of outline and encapsulation
7.5 Limiting values (absolute maximum system)
7.6 Electrical characteristics
7.7 Supplementary information
8 Photocouplers (optocouplers) providing protection
against electrical shock
8.1 Type
8.2 Semiconductor material
8.3 Details of outline and encapsulation
8.4 Ratings
8.5 Electrical characteristics
8.6 Electrical, environmental and/or endurance
information (supplementary information)
9 Laser diodes
9.1 Type
9.2 Semiconductor
9.3 Details of outline and encapsulation
9.4 Limiting values (absolute maximum system)
9.5 Electrical and optical characteristics
9.6 Supplementary information
Annexes
A (informative) Cross references index
B (normative) Input/output safety test
Figures
Tables
Provides essential ratings and characteristics of several categories or subcategories of optoelectronic devices not intended for use in the area of fibre optic systems or subsystems.
| Committee |
EPL/47
|
| DevelopmentNote |
To be read in conjunction with IEC 60747-1, IEC 62007-1 and IEC 62007-2 Renumbers and supersedes BS IEC 60747-5.2 2001 Version incorporates amendment 13433 to BS IEC 60747-5.2 (01/2002) Supersedes 00/202968 DC (02/2003)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 60747-5-2:2001/A1:2002 | Identical |
| DIN EN 60747-5-2 : 2003 | Identical |
| SN EN 60747-5-2 : 2001 | Identical |
| I.S. EN 60747-5-2:2001 | Identical |
| NF EN 60747-5-2 : 2001 AMD 1 2003 | Identical |
| IEC 60747-5-2:1997+AMD1:2002 CSV | Identical |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 62007-1:2015 | Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| HD 625.1 : 200S1 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS |
| EN 60747-5-3:2001/A1:2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-3: OPTOELECTRONIC DEVICES - MEASURING METHODS |
| IEC 62007-2:2009 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 60216-2:2005 | Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria |
| EN 60747-5-1:2001/A2:2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-1: OPTOELECTRONIC DEVICES - GENERAL |
| HD 611.1 : 200S1 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - GENERAL GUIDELINES FOR AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| IEC 60747-5-3:1997+AMD1:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods |
| IEC 60306-1:1969 | Measurement of photosensitive devices - Part 1: Basic recommendations |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| HD 323.2.3 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60747-1:2006+AMD1:2010 CSV | Semiconductor devices - Part 1: General |
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60747-5-1:1997+AMD1:2001+AMD2:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60651:1994/A2:2001 | SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| HD 323.2.2 : 200S1 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST B: DRY HEAT |
| HD 426.2 : 200S1 | SPECIFICATION FOR CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| HD 611.2 : 200S1 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| EN 60695-2-2:1994/A1:1995 | FIRE HAZARD TESTING - TEST METHODS - NEEDLE-FLAME TEST |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.