BS EN 60745-2-3:2011
Current
The latest, up-to-date edition.
Hand-held motor-operated electric tools. Safety Particular requirements for grinders, polishers and disk-type sanders
Hardcopy , PDF
English
10-31-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for the tests
6 Void
7 Classification
8 Marking and instructions
9 Protection against access to live parts
10 Starting
11 Input and current
12 Heating
13 Leakage current
14 Moisture resistance
15 Electric strength
16 Overload protection of transformers and
associated circuits
17 Endurance
18 Abnormal operation
19 Mechanical hazards
20 Mechanical strength
21 Construction
22 Internal wiring
23 Components
24 Supply connection and external flexible cords
25 Terminals for external conductors
26 Provision for earthing
27 Screws and connections
28 Creepage distances, clearances and distances
through insulation
29 Resistance to heat, fire and tracking
30 Resistance to rusting
31 Radiation, toxicity and similar hazards
Annexes
Annex K (normative) - Battery tools and battery packs
Annex L (normative) - Battery tools and battery packs
provided with mains connection or non-isolated sources
Annex AA (informative) - Material and thickness of guards
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZZ (informative) Coverage of Essential Requirements
of Directive 2006/42/EC
Pertains to grinders, polishers and disk-type sanders, including angle, straight and vertical tools, with a rated capacity not exceeding 230 mm.
| Committee |
CPL/116
|
| DevelopmentNote |
Supersedes BS EN 50144-2-3. Supersedes 03/112158 DC Supersedes 08/30190912 DC and 09/30203722 DC. (04/2010) Supersedes 08/30177436 DC and 09/30203158 DC. (10/2011) 2011 Edition is still active & will be withdrawn on 25-02-2016. Supersedes 11/30250890 DC. (06/2013) Supersedes 13/30277657 DC. (09/2014) 2011 + A11 2014 Edition is still active & will be withdrawn on 17-11-2017. Supersedes 13/30277612 DC & 14/30310314 DC.(01/2015). 2011 Edition Re-Issued in December 2015 & incorporates AMD 13 2015.(01/2016)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This clause of Part 1 is applicable, except as follows:
Addition:
This standard applies to grinders, polishers and disk-type sanders, including angle, straight and vertical tools, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity.
This standard does not apply to dedicated cut-off machines which are covered by IEC 60745-2-22.
This standard does not apply to random-orbit polishers and random-orbit sanders which are covered by IEC 60745-2-4.
| Standards | Relationship |
| DIN EN 60745-2-3 : 2015 AMD 13 2016 | Identical |
| EN 60745-2-3:2011/A13:2015 | Identical |
| NBN EN 60745-2-3 : 2011 AMD 3 2015 | Identical |
| NF EN 60745-2-3 : 2011 AMD 12 2017 | Identical |
| UNE-EN 60745-2-3:2011 | Identical |
| I.S. EN 60745-2-3:2011 | Identical |
| SN EN 60745-2-3 : 2011 AMD 11 2014 | Identical |
| EN 60745-2-3:2011 | Identical |
| IEC 60745-2-3:2006/AMD1:2010 | Identical |
| IEC 60745-2-3:2006+AMD1:2010+AMD2:2012 CSV | Identical |
| UNI CEN/TR 15350 : 2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| IEC 60745-2-22:2011 | Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines |
| ANSI B74.2 : 2003 | SPECIFICATIONS FOR SHAPES AND SIZES OF GRINDING WHEELS, AND FOR SHAPES, SIZES AND IDENTIFICATION OF MOUNTED WHEELS |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| IEC 60745-2-4:2002+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC 60745-2-23:2012 | Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.