BS EN 54-4:1998
Current
Current
The latest, up-to-date edition.
Fire detection and fire alarm systems Power supply equipment
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-31-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 General requirements
4.1 Conformity
4.2 Power sources
5 Functions
5.1 Power supply from the main power source
5.2 Power supply from the standby power source
(battery)
5.3 Charger
5.4 Faults
6 Materials, design and manufacture
6.1 Manufacturer's declaration
6.2 Mechanical design
6.3 Electrical design
6.4 Power supply interface
7 Documentation
7.1 User's documentation
7.2 Design documentation
8 Marking
9 Tests
9.1 General
9.2 Functional tests
9.3 Test of the charger and the standby power
source
9.4 Environmental tests
9.5 Cold (operational)
9.6 Damp heat, steady state (operational)
9.7 Impact (operational)
9.8 Vibration, sinusoidal (operational)
9.9 Electromagnetic Compatibility (EMC), Immunity tests
(operational)
9.10 (deleted)
9.11 (deleted)
9.12 (deleted)
9.13 (deleted)
9.14 Damp heat, steady state (endurance)
9.15 Vibration, sinusoidal (endurance)
Annex A (normative) Laboratory procedure for testing compliance
with the requirements of 5.2.1 and 5.4.c
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directives (89/106/EEC)
Bibliography
Describes requirements, methods of test and performance criteria for power supply equipment of fire detection and fire alarm systems installed in buildings.
| Committee |
FSH/12
|
| DevelopmentNote |
Together with BS EN 54-2 supersedes BS 5839-4(1988) Supersedes 85/38334 DC (12/2002) Supersedes 00/540035 DC (09/2003) Supersedes 03/110056 DC (11/2006)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 54-4 : 1999 AMD 2 2006 | Identical |
| NF EN 54-4 : 97 AMD 2 2006 | Identical |
| SN EN 54-4 : 1998 AMD 2 2006 | Identical |
| NS EN 54-4 : 1997 AMD 2 2006 | Identical |
| NBN EN 54-4 : 1998 AMD 2 2006 | Identical |
| UNI EN 54-4 : 2007 | Identical |
| I.S. EN 54-4:1998 | Identical |
| 07/30160342 DC : 0 | BS 7273-3 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 3: ELECTRICAL ACTUATION OF PRE-ACTION WATERMIST AND SPRINKLER SYSTEMS |
| 12/30260280 DC : 0 | BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DOMESTIC PREMISES |
| 03/119007 DC : DRAFT DEC 2003 | BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DWELLINGS |
| BS 5839-6:2013 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises |
| BS 5839-1(2002) : 2002 | FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
| BS 5839-9:2003 | Fire detection and alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems |
| BS 5839-1:2017 | Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises |
| BS 5839-9:2011 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems |
| 12/30260278 DC : 0 | BS 5839-1 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| BS 5839-8:1998 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems |
| BIP 2081 : 2012 | A GUIDE TO EMERGENCY LIGHTING |
| 06/30133094 DC : DRAFT OCT 2006 | BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS |
| BS 5839-8:2008 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems |
| BS 5839-8:2013 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of voice alarm systems |
| BS 7273-3:2008 | Code of practice for the operation of fire protection measures Electrical actuation of pre-action watermist and sprinkler systems |
| BS 7273-1:2006 | Code of practice for the operation of fire protection measures Electrical actuation of gaseous total flooding extinguishing systems |
| BS 7273-1:2000 | Code of practice for the operation of fire protection measures Electrical actuation of gaseous total flooding extinguishing systems |
| PD 6531:2010 | Queries and interpretations on BS 5839-1 |
| 07/30160345 DC : 0 | BS 7273-5 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 5: ELECTRICAL ACTUATION OF WATERMIST SYSTEMS |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| BS 7273-5:2008 | Code of practice for the operation of fire protection measures Electrical actuation of watermist systems (except pre-action systems) |
| BS 7273-4:2007 | Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors |
| BS 5839-1:2013 | Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises |
| BS PAS 95(2011) : 2011 | HYPOXIC AIR FIRE PREVENTION SYSTEMS - SPECIFICATION |
| EEMUA 138 : 2010 | DESIGN AND INSTALLATION OF ON-LINE ANALYSER SYSTEMS |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| 01/540647 DC : DRAFT MAY 2001 | BS 5839-1 - FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 1 - CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE |
| 07/30136498 DC : 0 | BS 5839-8 - FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 8: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND SERVICING OF VOICE ALARM SYSTEMS |
| 01/540648 DC : DRAFT MAY 2001 | BS 5839-9 FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 9: CODE OF PRACTICE FOR EMERGENCY VOICE COMMUNICATION SYSTEMS |
| 12/30258718 DC : 0 | BS 5839-8 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 8: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF VOICE ALARM SYSTEMS |
| PD 7974-4:2003 | Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4) |
| 09/30187281 DC : 0 | BS 5839-9 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 9: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF EMERGENCY VOICE COMMUNICATION SYSTEMS |
| BS 7273-3:2000 | Code of practice for the operation of fire protection measures Electrical actuation of pre-action sprinkler systems |
| BS 5839-6:2004 | Fire detection and fire alarm systems for buildings Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| ENV 50142 : 1994 | ELECTROMAGNETIC COMPATIBILITY - BASIC IMMUNITY STANDARD - SURGE IMMUNITY TESTS |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60950:1999 | Safety of information technology equipment |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60801-4:1988 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements |
| IEC 60817:1984 | Spring-operated impact-test apparatus and its calibration |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 54-1:2011 | Fire detection and fire alarm systems - Part 1: Introduction |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
| EN 60068-2-47:2005 | Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests |
| EN 60721-3-3 : 95 AMD 2 97 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.