BS EN 50341-2-4:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012)
Available format(s)
Hardcopy , PDF
Superseded date
06-14-2019
Superseded by
Language(s)
English
Published date
03-31-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references, definitions and symbols
3 Basis of design
4 Actions on lines
5 Electrical requirements
6 Earthing systems
7 Supports
8 Foundations
9 Conductors and earth wires
10 Insulators
11 Hardware
12 Quality assurance, checks and taking-over
Annex G (normative) - Calculation methods for
earthing systems
Annex J (normative) - Angles in lattice steel towers
Annex M (informative) - Geotechnical and structural
design of foundations
Annex AA (informative) - Assumptions for ice loads
Literature
Pertains for planning and design of overhead lines with nominal voltages above AC 1 kV.
| Committee |
PEL/11
|
| DevelopmentNote |
Supersedes BS EN 50423-3 and BS EN 50341-3, which remains current. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
94
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This EN applies for planning and design of overhead lines with nominal voltages above AC 1 kV. This EN needs not to be adopted for existing installations. Installations in the planning and construction stage may be completed adopting the standard edition valid at the beginning of planning. In Germany this EN is applicable for all types of conductors (according to the information in clause 1.2) which contain components for telecommunication. In Germany this EN is applicable for the installation of telecommunication equipment on supports. Reference is made to 4.11.1/DE.1 \'Extension of utilization\'
| Standards | Relationship |
| EN 50341-2-4:2016 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| DIN EN 50413 : 2009 AMD 1 2014 | BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| VDE 0210-20 : 1997 | OVERHEAD LINES - TESTING OF FOUNDATIONS FOR STRUCTURES |
| DIN EN 62004 : 2010 | THERMAL-RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
| DIN EN 1993-1-1:2010-12 | Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
| VDE 0441-100 : 2009 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| DIN EN 1993-1-5:2010-12 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
| VDE 0105-100 : 2015 AMD 1 2017 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 100: GENERAL REQUIREMENTS |
| DIN EN 61232:2001-09 | Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000 |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| DIN EN 60038 : 2012 | CENELEC STANDARD VOLTAGES (IEC 60038:2009) |
| DIN 48006-2:2005-10 | INSULATORS FOR OVERHEAD LINES - PART 2: LONG-ROD INSULATORS LG WITH CLEVIS CAPS |
| VDE 0175-1 : 2012 | CENELEC standard voltages |
| DIN VDE 0105-115:2006-02 | OPERATION OF ELECTRICAL INSTALLATIONS - PARTICULAR REQUIREMENTS FOR AGRICULTURAL PLANTS |
| IEC 60383-1:1993 | Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria |
| VDE 0845-8 : 2012 | AUSWIRKUNGEN ELEKTROMAGNETISCHER BEEINFLUSSUNGEN VON HOCHSPANNUNGSWECHSELSTROMBAHNEN UND/ODER HOCHSPANNUNGSANLAGEN AUF ROHRLEITUNGEN |
| DIN EN 50189:2000-09 | Conductors for overhead lines - Zinc coated steel wires; German version EN 50189:2000 |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDE 0212-399 : 2015 | Conductors for Overhead lines Conductors of concentric stranded round galvanized steel wires |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 12843:2004-11 | Precast concrete products - Masts and poles |
| VDE 0441-200 : 2009 | INSULATORS FOR OVERHEAD LINES - COMPOSITE LINE POST INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN 48201-1:1981-04 | COPPER STRANDED CONDUCTORS |
| VDE 0446-7 : 1999 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC INSULATORS FOR A.C. SYSTEMS - CHARACTERISTICS OF INSULATOR UNITS OF THE LONG ROD TYPE |
| VDE 0105-115:2006-02 | Operation of electrical installations Particular requirements for agricultural plants |
| DIN EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| DIN EN 50183:2000-12 | Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires; German version EN 50183:2000 |
| VDE 0100-442 : 2013-06 | Low-voltage electrical installations Part 4-442: Protection for safety – Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system (IEC 60364-4-44:2007 (Clause 442), modified); German implementation HD 60364-4-442:2012<br> |
| DIN EN 50443 : 2012 | EFFECTS OF ELECTROMAGNETIC INTERFERENCE ON PIPELINES CAUSED BY HIGH VOLTAGE A.C. ELECTRIC TRACTION SYSTEMS AND/OR HIGH VOLTAGE A.C. POWER SUPPLY SYSTEMS |
| IEC 61952:2008 | Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria |
| HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
| DIN EN 1995-1-1:2010-12 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008) |
| DIN VDE 0845-6-1 : 2013 | INFLUENCE OF HIGH VOLTAGE SYSTEMS ON TELECOMMUNICATION SYSTEMS - PART 1: GENERAL, LIMITS, CALCULATION AND MEASUREMENT METHODS |
| DIN 48201-2:1981-04 | BRONZE STRANDED CONDUCTORS |
| IEC 60865-1:2011 | Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| VDE 0446-1 : 97 COR 1 2001 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - PART 1: CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| HD 578 : 200S1 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| DIN 48006-3:1987-05 | INSULATORS FOR OVERHEAD LINES; SOLID-CORE (VK) INSULATORS |
| DIN EN 50182:2001-12 | CONDUCTORS FOR OVERHEAD LINES - ROUND WIRE CONCENTRIC LAY STRANDED CONDUCTORS |
| DIN EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| VDE 0210-1 : 2013 | Overhead electrical lines exceeding AC 1 kV Part 1: General requirements – Common specifications; |
| DIN EN 1997-1:2014-03 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| DIN VDE V 0212-490 : 2014 | FITTINGS FOR OVERHEAD LINES - PART 490: COMPONENTS FOR THE PROTECTION OF BIRDS - REQUIREMENTS AND TESTS |
| DIN EN 12385-4:2008-06 | STEEL WIRE ROPES - SAFETY - PART 4: STRANDED ROPES FOR GENERAL LIFTING APPLICATIONS |
| VDE 0848-1 : 2009 AMD 1 2014 | GRUNDNORM ZU MESS- UND BERECHNUNGSVERFAHREN DER EXPOSITION VON PERSONEN IN ELEKTRISCHEN, MAGNETISCHEN UND ELEKTROMAGNETISCHEN FELDERN (0 HZ BIS 300 GHZ) |
| DIN EN 50522 : 2011 | EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| DIN VDE 0845-6-2 : 2014-09 | ELECTROMAGNETIC INFLUENCE OF ELECTRIC POWER SUPPLY ON TELECOMMUNICATION SYSTEMS - PART 2: INFLUENCE BY THREE PHASE AC SYSTEMS |
| VDE 0212-3 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| DIN 48200-1:1981-04 | COPPER WIRES FOR STRANDED CONDUCTORS |
| DIN 48006-1:2005-10 | INSULATORS FOR OVERHEAD LINES - PART 1: LONG-ROD INSULATORS LP WITH SOCKET CAPS |
| VDE 0212-303 : 2010 | THERMAL-RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
| VDE 0674-4 : 1993 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| DIN 48200-2:1981-04 | BRONZE WIRES FOR STRANDED CONDUCTORS |
| DIN EN 61952 : 2009 | INSULATORS FOR OVERHEAD LINES - COMPOSITE LINE POST INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| VDE 0845-6-2 : 2014-09 | MASSNAHMEN BEI BEEINFLUSSUNG VON TELEKOMMUNIKATIONSANLAGEN DURCH STARKSTROMANLAGEN - TEIL 2: BEEINFLUSSUNG DURCH DREHSTROMANLAGEN |
| VDE 0101-2 : 2011 | Earthing of power installations exceeding 1 kV a.c.; |
| DIN 1054:2010-12 | Subsoil - Verification of the safety of earthworks and foundations - Supplementary rules to DIN EN 1997-1 |
| VDE 0845-6-1 : 2013 | MASSNAHMEN BEI BEEINFLUSSUNG VON TELEKOMMUNIKATIONSANLAGEN DURCH STARKSTROMANLAGEN - TEIL 1: GRUNDLAGEN, GRENZWERTE, BERECHNUNGS- UND MESSVERFAHREN |
| IEC 61232:1993 | Aluminium-clad steel wires for electrical purposes |
| DIN EN 61109 : 2009 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| VDE-AR-N 4210-11 : 2011 | Protection of birds on medium voltage overhead lines |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 60433 : 1999 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC INSULATORS FOR A.C. SYSTEMS - CHARACTERISTICS OF INSULATOR UNITS OF THE LONG ROD TYPE |
| DIN EN 60889:1997-08 | Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987); German version EN 60889:1997 |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN 4102-7:1998-07 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 7: ROOFING; DEFINITIONS, REQUIREMENTS AND TESTING |
| VDE V 0212-490 : 2014 | Fittings for overhead lines Part 490: Components for the protection of birds – Requirements and tests |
| DIN EN 61773 : 1997 | OVERHEAD LINES - TESTING OF FOUNDATIONS FOR STRUCTURES |
| DIN VDE 0100-442 : 2013-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-442: PROTECTION FOR SAFETY - PROTECTION OF LOW-VOLTAGE INSTALLATIONS AGAINST TEMPORARY OVERVOLTAGES DUE TO EARTH FAULTS IN THE HIGH-VOLTAGE SYSTEM AND DUE TO FAULTS IN THE LOW VOLTAGE SYSTEM (IEC 60364-4-44:2007 (CLAUSE 442) |
| DIN VDE 0212-399 : 2015 | CONDUCTORS FOR OVERHEAD LINES - CONDUCTORS OF CONCENTRIC STRANDED ROUND GALVANIZED STEEL WIRES |
| DIN EN 60865-1 : 2012-09 | SHORT-CIRCUIT CURRENTS - CALCULATION OF EFFECTS - PART 1: DEFINITIONS AND CALCULATION METHODS (IEC 60865-1:2011) |
| DIN IEC 60273 : 1993 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| DIN EN 60383-1 : 97 COR 1 2001 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - PART 1: CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.