BS EN 2267-011:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C DZA family, single and multicore assembly for use in low pressure atmosphere. Product standard
Hardcopy , PDF
01-05-2024
English
07-31-2015
European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials and construction
5 Required characteristics
6 Quality assurance
7 Designation
8 Identification and marking
9 Packaging, labelling and delivery lengths
10 Technical specification
Defines the characteristics of electrical wires DZA family for use in the on board: - 115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft - 230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
Committee |
ACE/6
|
DevelopmentNote |
Supersedes 09/30209902 DC. (07/2015)
|
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This European Standard specifies the characteristics of electrical wires DZA family for use in the on board:
115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft.
230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between −65 °C and 260 °C. These cables are demonstrated to be arc resistant for both networks (115 V and 230 V).
Standards | Relationship |
EN 2267-011:2015 | Identical |
EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing |
EN 3475-504:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion |
EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
EN 3475-302:2006 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
EN 3475-202:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass |
EN 3475-507:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating |
EN 3475-502:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation |
EN 2267-002:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General |
TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature |
EN 2235:2015 | Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification |
EN 3475-410:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance |
EN 3475-506:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity |
EN 3475-305:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance |
EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
EN 3475-404:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock |
EN 3475-306:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors |
EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination |
EN 3475-505:2012 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands |
EN 3475-413:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test |
EN 3475-303:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance |
EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
EN 3475-304:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance |
EN 3475-503:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion |
EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length |
EN 3475-403:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking |
EN 3475-402:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination |
EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
EN 3475-307:2015 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage |
EN 3475-203:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
EN 3475-414:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
EN 3475-704:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility |
EN 3475-412:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance |
EN 3475-501:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
EN 3475-406:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test |
EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
EN 3475-508:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness |
EN 3475-407:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.