BS EN 187103:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
Hardcopy , PDF
03-12-2021
English
02-14-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 General
3 Normative references
4 Symbols and abbreviations
4.1 Symbols
4.2 Abbreviations
5 Family specification for optical telecommunication cables for
indoor application (blank detail specification and minimum
requirements)
5.1 Cable description
5.2 Optical fibres
5.2.1 Single mode dispersion unshifted (b1.1) optical fibre
5.2.2 Single mode dispersion shifted (b1.2) optical fibre
5.2.3 Single mode non zero dispersion shifted (b4) optical
fibre
5.2.4 Details on family requirements
5.3 Cable element
5.3.1 Tests applicable
5.3.2 Details on family requirements
5.3.3 Additional tests and requirements
5.4 Cable construction
5.4.1 Tests applicable
5.4.2 Details on family requirements
5.5 Installation and operating conditions
5.6 Mechanical and environmental tests
5.6.1 Tests applicable
5.6.2 Details on family requirements and test conditions
for optical fibre cable tests
Covers optical cables for telecommunication application to be used indoor.
| Committee |
GEL/86/1
|
| DevelopmentNote |
Supersedes 00/240688 DC (02/2003)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SN EN 187103 : 2003 | Identical |
| EN 187103:2003 | Identical |
| DIN EN 187103 : 2003 | Identical |
| NEN EN 187103 : 2003 | Identical |
| NBN EN 187103 : 2003 | Identical |
| NF EN 187103 : 2003 | Identical |
| I.S. EN 187103:2003 | Identical |
| IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
| IEC 60794-1:1996 | Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1) |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
| EN 188102:1995 | Family Specification: Single-mode dispersion shifted (B2) optical fibre |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| EN 188000 : 1992 | GENERIC SPECIFICATION FOR OPTICAL FIBRES |
| EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
| HD 624.7 : 200S1 | MATERIALS USED IN COMMUNICATION CABLES - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUND |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| IEC 60811-4-2:2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
| IEC 60811-5-1:1990+AMD1:2003 CSV | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| EN 188101:1995 | Family Specification: Single-mode dispersion unshifted (B1.1) optical fibre |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.