BS EN 15250:2007
Current
The latest, up-to-date edition.
Slow heat release appliances fired by solid fuel. Requirements and test methods
Hardcopy , PDF
English
04-30-2007
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials, design and construction
4.1 Production documentation
4.2 Construction
4.2.1 General construction
4.2.2 Cleaning of heating surfaces
4.2.3 Flue spigot or socket
4.2.4 Flueways
4.2.5 Ashpan and ash removal
4.2.6 Bottomgrate
4.2.7 Combustion air supply
4.2.8 Control of flue gas
4.2.9 Firedoors and charging doors
4.2.10 Flue bypass device
4.2.11 Front firebars and/or deepening plate
5 Safety
5.1 Temperature rise in the fuel storage container
5.2 Temperature rise of the operating components
5.3 Temperature of adjacent combustible materials
5.4 Electrical safety
6 Performance
6.1 Flue gas temperature
6.2 Carbon monoxide emission
6.3 Efficiency
6.4 Flue draught
6.5 Refuelling intervals
6.6 Thermal storage capacity
7 Appliance instructions
7.1 General
7.2 Installation instructions
7.3 User operating instructions
8 Marking
9 Evaluation of conformity
9.1 General
9.2 Type testing
9.2.1 Initial type testing
9.2.2 Further type testing
9.3 Factory production control (FPC)
9.3.1 General
9.3.2 Raw materials and components
9.3.3 Control of inspection, measuring and test equipment
9.3.4 Process control
9.3.5 Product inspection, testing and evaluation
9.3.6 Non conforming products
9.3.7 Corrective and preventive action
9.3.8 Handling, storage, packaging, preservation and delivery
Annex A (normative) - Test methods
A.1 Test environment
A.1.1 Ambient room temperature
A.1.2 Cross-draught
A.1.3 External sources
A.2 Test assembly
A.2.1 General
A.2.2 Trihedron
A.2.3 Measurement section
A.2.4 Connection of appliance to measurement section
A.2.5 Measurement of appliance surface temperature
for slow heat release appliances
A.3 Measurement equipment
A.4 Test procedures
A.4.1 Appliance installation
A.4.2 Fuel load
A.4.3 Fuelling and de-ashing the fire
A.4.4 Flue gas losses
A.4.5 Combustible heat losses in the residue
A.4.6 Burning rate performance test
A.4.7 Temperature safety test for woodburning and
multifuel appliances
A.5 Test results
A.6 Calculation methods
A.6.1 Notations and units used
A.6.2 Equations
A.7 Test report
Annex B (normative) - Test fuels and recommended fuels
B.1 General
B.2 Test fuel
B.2.1 Selection of test fuel
B.2.2 Storage, preparation and analysis
B.3 Tests for recommended fuels
B.3.1 Basis of testing
B.3.2 Test methods and criteria
Annex C (informative) Calculation of an approximate heat
release curve against time
Annex ZA (informative) Clauses of this European standard
addressing the provisions of the EU Construction
Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for the attestation of conformity
of slow heat release appliances fired by
solid fuels
ZA.2.1 System of attestation of conformity
ZA.2.2 EC Declaration of conformity
ZA.3 CE Marking and labelling
Bibliography
Describes requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential slow heat release appliances fired by solid fuel.
Committee |
RHE/28
|
DevelopmentNote |
Supersedes 05/30134237 DC. (04/2007)
|
DocumentType |
Standard
|
Pages |
66
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential slow heat release appliances fired by solid fuel. This European Standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a declared period of time after the fire has gone out. This European Standard also specifies a minimum time period from the appliance achieving the maximum differential surface temperature and falling to 50 % of that maximum value. These appliances provide heat into the space where they are installed. These slow heat release appliances may be supplied either as an assembled appliance or as a manufacturer’s pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturer’s specified assembly instructions. One off installations are not included. These appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer’s instructions. Wood pellets which are hand fuelled may also be burned either on the existing appliance bottomgrate or in a special basket arrangement which is placed by the user into the existing firebox. This European Standard is not applicable to mechanically fed appliances, appliances having fan assisted combustion air or appliances with boiler.
Standards | Relationship |
SN EN 15250 : 2007 | Identical |
NEN EN 15250 : 2007 | Identical |
I.S. EN 15250:2007 | Identical |
NF EN 15250 : 2007 | Identical |
DIN EN 15250:2007-06 | Identical |
NS EN 15250 : 1ED 2007 | Identical |
NBN EN 15250 : 2007 | Identical |
EN 15250:2007 | Identical |
UNI EN 15250 : 2007 | Identical |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
ISO 11722:2013 | Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen |
EN 50165 : 97 AMD 1 2001 | ELECTRICAL EQUIPMENT ON NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
ISO 334:2013 | Solid mineral fuels Determination of total sulfur Eschka method |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 687:2010 | Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
ISO 501:2012 | Hard coal — Determination of the crucible swelling number |
ISO 1171:2010 | Solid mineral fuels — Determination of ash |
ISO 562:2010 | Hard coal and coke — Determination of volatile matter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.