BS EN 14870-2:2004
Current
The latest, up-to-date edition.
Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings
Hardcopy , PDF
English
01-20-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Explanatory Note
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation
6 Pressure rating and design
6.1 General
6.2 Tees and headers
6.3 Extruded outlet headers
7 Information to be supplied by the purchaser
7.1 Principal information
7.2 Supplementary information
8 Manufacturing
8.1 Manufacturing procedure specification
8.2 Starting material
8.3 Fitting manufacture
9 Testing and inspection
9.1 General requirements
9.2 Extent of testing and inspection
9.3 Chemical composition
9.4 Mechanical testing
9.5 Non-destructive testing
9.6 Dimensions
9.7 Gauging
9.8 Hydrostatic testing
10 Inspection document
11 Marking
Annex A (normative) Design calculations
Annex B (normative) Proof test
Annex ZA (normative) Normative references to international
publications with their corresponding European publications
Bibliography
Describes the technical delivery conditions for unalloyed or low-alloy steel seamless and welded pipeline fittings for use in pipeline transportation systems for the petroleum and natural gas industries as defined in EN 14161.
| Committee |
PSE/17
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| EN 14870-2:2004 | Identical |
| NF EN 14870-2 : 2005 | Identical |
| NS EN 14870-2 : 1ED 2005 | Identical |
| I.S. EN 14870-2:2005 | Identical |
| NBN EN 14870-2 : 2005 | Identical |
| UNI EN 14870-2 : 2005 | Identical |
| SN EN 14870-2 : 2006 | Identical |
| NEN EN 14870-2 : 2005 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 4885:2017 | Ferrous materials Heat treatments Vocabulary |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 783:1999 | Metallic materials Tensile testing at elevated temperature |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO/TR 7705:1991 | Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| ISO 13664:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ISO 3545-3:1989 | Steel tubes and fittings — Symbols for use in specifications — Part 3: Tubular fittings with circular cross-section |
| MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.