BS EN 1458-1:2011
Current
The latest, up-to-date edition.
Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety
Hardcopy , PDF
English
12-31-2011
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Construction and design requirements
6 Operational safety
7 Marking
Annex A (informative) - National situations
Annex B (normative) - Special national conditions
Annex ZA (informative) - Relationship between this European
and the Essential Requirements of EU Directive
90/396/EEC on the approximation of the laws of Member
States concerning gas appliances
Bibliography
Describes the requirements and test methods for the safety, and marking of domestic direct gas-fired tumble dryers, of types B[22D] and B[23D], of nominal heat input not exceeding 6 kW, hereafter referred to as "appliances".
| Committee |
GSE/37
|
| DevelopmentNote |
Supersedes BS 5258-17(1992). (01/2000) Supersedes 94/707432 DC. (09/2005) Supersedes 11/30238482 DC. (12/2011)
|
| DocumentType |
Standard
|
| Pages |
102
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Cette Norme européenne définit les exigences et les méthodes d\'essais relatives à la construction, la sécurité et le marquage des sèche-linge domestiques à tambour rotatif à chauffage direct utilisant les combustibles gazeux, de type B22D et B23D, de débit calorifique nominal ne dépassant pas 6 kW, désignés, ci après, sous le terme \'appareils\'. Cette Norme européenne ne s\'applique pas : a) aux appareils à combustion catalytique ; b) aux appareils conçus exclusivement à des fins industrielles ; c) aux appareils destinés à être utilisés dans des locaux où règnent certaines conditions spécifiques, telles que la présence d\'atmosphère corrosive ou explosive ; d) aux appareils du type à condensation à l\'intérieur desquels l\'air chauffé et les produits de combustion utilisés pour le séchage sont déshumidifiés par refroidissement à l\'eau ou à l\'air ; e) aux appareils destinés à être utilisés dans les véhicules ou à bord des bateaux ou des avions. Cette Norme européenne couvre uniquement les essais de type.
| Standards | Relationship |
| I.S. EN 1458-1:2011 | Identical |
| NEN EN 1458-1 : 2011 | Identical |
| NS EN 1458-1 : 2011 | Identical |
| NBN EN 1458-1 : 2012 | Identical |
| EN 1458-1:2011 | Identical |
| NF EN 1458-1 : 2012 | Identical |
| DIN EN 1458-1:2012-02 | Identical |
| UNE-EN 1458-1:2012 | Identical |
| BS 7624:2004 | Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification |
| IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| 2009/142/EC : 2009 | DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 30 NOVEMBER 2009 RELATING TO APPLIANCES BURNING GASEOUS FUELS (TEXT WITH EEA RELEVANCE) |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| ISO 1182:2010 | Reaction to fire tests for products — Non-combustibility test |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 126:2012 | Multifunctional controls for gas burning appliances |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions — Part 1: Country codes |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| 1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
| EN 257:2010 | Mechanical thermostats for gas-burning appliances |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.