BS EN 1452-3 : 2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: FITTINGS
Hardcopy , PDF
01-31-2010
BS EN ISO 1452-3:2010
BS EN ISO 1452-2:2009
BS EN ISO 1452-1:2009
BS EN ISO 1452-4:2009
BS EN ISO 1452-5:2009
English
01-01-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
4 Material
4.1 Fitting material
4.2 MRS-value
4.3 Designation of fittings material
4.4 Strength of injection-moulded material
4.5 Material strength of fittings made from pipe
5 General characteristics
5.1 Appearance
5.2 Colour
5.3 Opacity
6 Geometrical characteristics
6.1 Measurement of dimensions
6.2 Nominal diameters
6.3 Fittings for solvent cementing
6.4 Flange adapters and flanges
6.5 Elastomeric ring seal fittings
6.6 End-load-bearing double-sockets with
elastomeric seals
7 Classification and operating conditions
7.1 Classification
7.2 Determination of the allowable operating
pressure PFA for water up to 45 degree C
8 Mechanical characteristics
8.1 Resistance to internal pressure of fittings or
parts of fittings
8.2 Crushing test
9 Physical characteristics
10 Chemical characteristics
11 Sealing rings
12 Adhesives
13 Performance requirements
14 Marking
14.1 General
14.2 Minimum required marking
14.3 Additional marking
Annex A (normative) - Imperial(inch)-sized fittings
Annex B (informative) - Bibliography
Defines the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems used in the field of water supply.
| Committee |
PRI/61/2
|
| DevelopmentNote |
Supersedes 94/341028 DC. Together with BS EN 1452-1, BS EN 1452-2, BS EN 1452-4 and BS EN 1452-5, it supersedes BS 3505(1986) and BS 4346-1(1969) which remains current. Together with BS EN 14814, BS EN 1452-1, BS EN 1452-2, BS EN 1452-4 and BS EN 1452-5, it supersedes BS 4346-3(1982). (08/2009) Together with BS EN 1452-1, BS EN 1452-2, BS EN 1452-4 and BS EN 1452-5, it supersedes BS 4346-2(1970) which remains current and inactive for the new design. (09/2009)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN 1452-3 : 2001 | Identical |
| UNE-EN 1452-3:2000 | Identical |
| NBN EN 1452-3 : 2000 | Identical |
| DIN EN 1452-3:1999-09 | Identical |
| NF EN 1452-3 : 1999 | Identical |
| I.S. EN 1452-3:1999 | Identical |
| EN 1452-3 : 1999 | Identical |
| SN EN 1452-3 : 1999 | Identical |
| NEN EN 1452-3 : 1999 | Identical |
| NS EN 1452-3 : 1999 | Identical |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 6700(2006) : 2006 | DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION |
| EN 15014:2007 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 1452-5 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ENV 1452-6 : DRAFT 2001 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 6: GUIDANCE FOR INSTALLATION |
| ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| EN 802:1994 | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| EN 578 : 1993 | PLASTICS PIPING SYSTEMS - PLASTICS PIPES AND FITTINGS - DETERMINATION OF THE OPACITY |
| EN ISO 13783:1997 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
| ISO 2536:1974 | Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series Dimensions of flanges |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN 1452-4 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 4: VALVES AND ANCILLARY EQUIPMENT |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN 1452-2 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| EN 12107 : 1997 | PLASTICS PIPING SYSTEM - INJECTION MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS |
| ISO/TR 9080:1992 | Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.