BS EN 14420-4:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hose fittings with clamp units Flange connections
Hardcopy , PDF
09-07-2022
English
07-31-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Hose fittings with flanges
5 Dimensions, designations
6 Surface finish
7 Materials
8 Marking
9 Type testing and quality control
Bibliography
Describes requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092-1, on hose fittings with clamp units according to EN 14420-3.
| Committee |
PRI/66
|
| DevelopmentNote |
Supersedes 02/121665 DC. (10/2005) Supersedes 06/30154637 DC. (06/2007)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092 1, on hose fittings with clamp units according to EN 14420-3. Maximum working pressure is 25 bar; maximum working temperature is 65 °C. Additionally, flanges are also usable according to EN 14422.
| Standards | Relationship |
| UNE-EN 14420-4:2005 | Identical |
| ONORM EN 14420-4 : 2013 | Identical |
| NF EN 14420-4 : 2013 | Identical |
| NEN EN 14420-4 : 2013 | Identical |
| SN EN 14420-4:2013 | Identical |
| NBN EN 14420-4 : 2013 | Identical |
| UNI EN 14420-4 : 2013 | Identical |
| NS EN 14420-4 : 2013 | Identical |
| I.S. EN 14420-4:2013 | Identical |
| EN 14420-4:2013 | Identical |
| DIN EN 14420-4:2013-09 | Identical |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 11666:2010 | Non-destructive testing of welds Ultrasonic testing Acceptance levels |
| ISO 23277:2015 | Non-destructive testing of welds Penetrant testing Acceptance levels |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| EN ISO 23278 : 2015 | NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015) |
| EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 23278:2015 | Non-destructive testing of welds Magnetic particle testing Acceptance levels |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 10283:2010 | Corrosion resistant steel castings |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN ISO 23279:2017 | Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017) |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.