BS EN 14334:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LPG equipment and accessories. Inspection and testing of LPG road tankers
Hardcopy , PDF
07-25-2023
English
11-30-2014
Committee |
PVE/19
|
DevelopmentNote |
Supersedes 02/701471 DC. (05/2005) Supersedes 10/30216074 DC & 14/30300118 DC. (11/2014)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This European Standard specifies minimum requirements for the inspection and testing of the LPG road tanker, which includes its pressure vessel, accessories and vehicle LPG equipment. This European Standard does not specify requirements for the initial inspection (after manufacture) of a pressure vessel, see EN12493 , or for service equipment on the road tanker, see EN12252 . This European Standard does not apply to compartmented road tankers. NOTE1 There is no upper size limit for the pressure vessel as this will be determined by the gross vehicle weight limitation. NOTE2 For inspection and testing requirements of equipment other than the pressure vessel, accessories and vehicle LPG equipment, see applicable regulations.
Standards | Relationship |
ONORM EN 14334 : 2015 | Identical |
SN EN 14334 : 2015 | Identical |
UNI EN 14334 : 2014 | Identical |
NF EN 14334 : 2015 | Identical |
I.S. EN 14334:2014 | Identical |
EN 14334:2014 | Identical |
DIN EN 14334:2015-01 | Identical |
NEN EN 14334 : 2014 | Identical |
NBN EN 14334 : 2014 | Identical |
UNE-EN 14334:2015 | Identical |
EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
PREN 16631 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - RECONDITIONING REQUIREMENTS |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
EN 13109:2010 | LPG equipment and accessories - LPG tanks and drums - Disposal |
EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.