BS EN 14225-2:2017
Current
The latest, up-to-date edition.
Diving suits Dry suits. Requirements and test methods
Hardcopy , PDF
English
01-11-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Marking
7 Information to be supplied by the manufacturer
Annex A (normative) - Ratings of practical performance,
thermal comfort and perceived exertion
Annex B (normative) - Abrasion - Requirements for glass
paper and glass cloth
Annex C (informative) - Significant technical changes
between this European Standard and EN 14225-2:2005
Annex ZA (informative) - Relationship between this
European Standard and the Essential requirements
of Directive 89/686/EEC aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the Essential Requirements
of Regulation (EU) 2016/425 aimed to be covered
Bibliography
Describes the construction and performance of dry suits for wear by divers for underwater activities where the user is breathing underwater.
| Committee |
PH/3/6
|
| DevelopmentNote |
Supersedes 02/563070 DC. (05/2005) Supersedes 14/30293497 DC. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the construction and performance of dry suits for wear by divers for underwater activities where the user is breathing underwater. Marking, labelling, information meant to be provided at the point of sale and instructions for use are also specified. Laboratory and practical performance tests are specified.
| Standards | Relationship |
| SN EN 14225-2 : 2005 | Identical |
| UNI EN 14225-2 : 2005 | Identical |
| NBN EN 14225-2 : 2005 | Identical |
| DIN EN 14225-2:2014-03 (Draft) | Identical |
| EN 14225-2:2017 | Identical |
| I.S. EN 14225-2:2005 | Identical |
| NF EN 14225-2 : 2005 | Identical |
| UNE-EN 14225-2:2005 | Identical |
| ISO 15027-3:2012 | Immersion suits Part 3: Test methods |
| EN 530:2010 | Abrasion resistance of protective clothing material - Test methods |
| EN ISO 13995:2000 | Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| EN ISO 10551:2001 | Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (ISO 10551:1995) |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN 250:2014 | Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| ISO 4046-3:2002 | Paper, board, pulps and related terms Vocabulary Part 3: Paper-making terminology |
| ISO 811:1981 | Textile fabrics Determination of resistance to water penetration Hydrostatic pressure test |
| EN ISO 15027-3 : 2012 COR 2012 | IMMERSION SUITS - PART 3: TEST METHODS (ISO 15027-3:2012) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 10551:1995 | Ergonomics of the thermal environment Assessment of the influence of the thermal environment using subjective judgement scales |
| EN 1809:2014+A1:2016 | Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods |
| EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| ISO 13995:2000 | Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.