BS EN 14188-2:2004
Current
The latest, up-to-date edition.
Joint fillers and sealants Specifications for cold applied sealants
Hardcopy , PDF
English
01-12-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and specification
5 Requirements
6 Evaluation of conformity
7 Marking, labelling and packaging
Annex A (normative) Initial Type Testing and frequencies
of testing for Factory Production Control
Annex B (informative) Example of a product data sheet
Annex C (informative) Processing information for installation
of cold applied joint sealants
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Bibliography
Defines the requirements for cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, parking decks, bridge decks, airfields and other trafficked areas.
| Committee |
B/510/3
|
| DevelopmentNote |
Supersedes 02/106387 DC. (01/2005)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This document specifies the requirements for cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, parking decks, bridge decks, airfields and other trafficked areas.
This document does not cover the use in gasoline stations, jet fuel stations on airfields and the chemical industry.
| Standards | Relationship |
| UNI EN 14188-2 : 2005 | Identical |
| SN EN 14188-2 : 2005 | Identical |
| NF EN 14188-2 : 2005 | Identical |
| EN 14188-2:2004 | Identical |
| NS EN 14188-2 : 1ED 2005 | Identical |
| NBN EN 14188-2 : 2005 | Identical |
| NEN EN 14188-2 : 2004 | Identical |
| UNE-EN 14188-2:2005 | Identical |
| I.S. EN 14188-2:2005 | Identical |
| DIN EN 14188-2:2005-03 | Identical |
| BS 5385-3:2014 | Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice |
| 14/30283603 DC : 0 | BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE |
| 08/30043515 DC : DRAFT FEB 2008 | BS 5385-1 - WALL AND FLOOR TILING - PART 1: DESIGN AND INSTALLATION OF CERAMIC AND NATURAL STONE AND MOSAIC WALL TILING IN NORMAL INTERNAL CONDITIONS - CODE OF PRACTICE |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 6927:2012 | Buildings and civil engineering works Sealants Vocabulary |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| EN ISO 7390:2003 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003) |
| ISO 7389:2002 | Building construction Jointing products Determination of elastic recovery of sealants |
| EN 26927:1990 | Building construction - Jointing products - Sealants - Vocabulary (ISO 6927:1981) |
| EN 14187-3:2017 | Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 9048:1987 | Building construction — Jointing products — Determination of extrudability of sealants using standardized apparatus |
| EN 14187-4:2017 | Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals |
| EN 28394 : 1990 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - DETERMINATION OF EXTRUDABILITY OF ONE-COMPONENT SEALANTS |
| ISO 8394:1988 | Building construction Jointing products Determination of extrudability of one-component sealants |
| ISO 7390:2002 | Building construction Jointing products Determination of resistance to flow of sealants |
| EN 14187-6:2017 | Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 14187-7:2003 | Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame |
| EN 14187-1:2017 | Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure |
| PREN 14187-9 : DRAFT 2016 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 9: FUNCTION TESTING OF JOINT SEALANTS |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 14187-8:2017 | Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| EN 14187-2:2017 | Cold applied joint sealants - Test methods - Part 2: Determination of tack free time |
| EN 29048:1990 | Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus (ISO 9048:1987) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| EN 28340 : 1990 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - SEALANTS - DETERMINATION OF TENSILE PROPERTIES AT MAINTAINED EXTENSION |
| EN 14187-5:2003 | Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.