BS EN 14154-4:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water meters Additional functionalities
Hardcopy , PDF
03-20-2023
English
11-30-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Additional functionalities
6 Environmental considerations
Annex A (normative) - Declaration of conformity
to EN 14154-4
Annex B (informative) - Smart Metering, overview,
core functionalities and definitions
Annex C (informative) - References to EN 14154-1,
EN 14154-2 and EN 14154-3 and EN ISO 4064-1,
EN ISO 4064-2, EN ISO 4064-3, EN ISO 4064-4,
EN ISO 4064-5
Bibliography
Describes requirements and testing of additional functionalities for water meters, without metrological impact, in combination with Additional Functionality Devices (AFD) and in response to EU/EFTA Mandate M/441 EN.
| Committee |
CPI/30/7
|
| DevelopmentNote |
Supersedes 13/30274904 DC. (12/2014)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies definitions, requirements and testing of additional functionalities for water meters, without metrological impact, in combination with Additional Functionality Devices (AFD) and in response to EU/EFTA Mandate M/441EN. These AFDs are to be considered as “ancillary devices\' as defined in ENISO4064‑1 and ENISO4064‑4 . This European Standard does not cover the changing of metrological software within the meter or the upload/download of metrological software. NOTE A manufacturer can claim compliance only for additional functionalities described in this European Standard. It is not mandatory that an AFD complies with all additional functionalities described herein.
| Standards | Relationship |
| EN 14154-4:2014 | Identical |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN ISO 4064-1:2017 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| EN 14154-1:2005+A2:2011 | Water meters - Part 1: General requirements |
| CEN/CLC/ETSI TR 50572:2011 | Functional Reference Architecture for Communications in Smart Metering Systems |
| ISO 4064-4:2014 | Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1 |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| ISO 4064-5:2014 | Water meters for cold potable water and hot water — Part 5: Installation requirements |
| ISO 4064-3:2014 | Water meters for cold potable water and hot water — Part 3: Test report format |
| ISO 4064-2:2014 | Water meters for cold potable water and hot water Part 2: Test methods |
| EN 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
| EN ISO 4064-2:2017 | Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) |
| EN 13757-5:2015 | Communication systems for meters - Part 5: Wireless M-Bus relaying |
| IEC 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
| EN 13757-4:2013 | Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands) |
| EN 14154-3:2005+A2:2011 | Water meters - Part 3: Test methods and equipment |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60086-1:2015 | Primary batteries - Part 1: General |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| OIML R 49-1 : 2013 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| EN ISO 4064-5:2017 | Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014) |
| EN 60086-4:2015 | Primary batteries - Part 4: Safety of lithium batteries |
| EN 13757-6:2015 | Communication systems for meters - Part 6: Local Bus |
| CEN/CLC/ETSI/TR 50572 : 2011 | FUNCTIONAL REFERENCE ARCHITECTURE FOR COMMUNICATIONS IN SMART METERING SYSTEMS |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 13757-1:2014 | Communication systems for meters - Part 1: Data exchange |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.