BS EN 13981-3:2006
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings
Hardcopy , PDF
English
10-31-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
5.1 Production and manufacturing processes
5.2 Quality assurance
5.3 Chemical composition and tempers
5.4 Mechanical properties of castings
5.4.1 Mechanical properties of castings under
static loading
5.4.2 Mechanical properties of castings under
cyclic loading
5.5 Properties of welded joints
5.6 Internal defects
5.7 Surface imperfections
5.8 Finishing welding
5.9 Tolerances on dimensions and form
6 Qualification procedures
6.1 First-off article approval procedure
6.2 Additional qualification procedure
7 Sampling and test methods
7.1 General
7.2 Analysis of chemical composition
7.3 Tensile test
7.4 Preparation of test pieces for the testing of
welded joints
7.5 Tensile testing on welded joints
7.6 Fatigue testing
7.7 Visual inspection
7.8 Dye penetrant testing
7.9 X-ray examination
7.10 Measurement of dimensions
8 Traceability
9 Marking of products
10 Inspection certificate
11 Record keeping
12 Packaging
13 Application and use
14 Complaints of non-conformity
Annex A (normative) Chemical composition and mechanical properties
of EN AC-AIZn10Si8Mg
Annex B (informative) Guidelines for application and use
B.1 Selection of alloys
B.2 Fatigue Design
B.3 Welding
Bibliography
Defines requirements for castings which contribute to the structural properties of the railcar bodyshell and other major structural components.
| Committee |
NFE/35
|
| DevelopmentNote |
Supersedes 04/30050372 DC (11/2006)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This document specifies requirements for castings which contribute to the structural properties of the railcar bodyshell and other major structural components. It specifies particular requirements regarding qualification, quality control, material properties and dimensional tolerances and gives guide-lines for application and use.
| Standards | Relationship |
| EN 13981-3:2006 | Identical |
| I.S. EN 13981-3:2006 | Identical |
| NF EN 13981-3 : 2006 | Identical |
| NS EN 13981-3 : 1ED 2007 | Identical |
| DIN EN 13981-3:2006-12 | Identical |
| NBN EN 13981-3 : 2007 | Identical |
| NEN EN 13981-3 : 2006 | Identical |
| SN EN 13981-3 : 2006 | Identical |
| UNE-EN 13981-3:2007 | Identical |
| UNI EN 13981-3 : 2006 | Identical |
| EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ASTM E 155 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ENV 1999-2 : DRAFT 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 462-1:1994 | Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value |
| EN 12681:2003 | Founding - Radiographic examination |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.