BS EN 13862 : 2001
Current
The latest, up-to-date edition.
FLOOR CUTTING-OFF MACHINES - SAFETY
Hardcopy , PDF
English
01-01-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Floor sawing machine
3.2 Types of machines
3.3 Parts of a floor sawing machine
3.4 Cutting head
3.5 Rated spindle speed
3.6 Tool(s)
3.7 Tool flange
3.8 Tool guard
3.9 Nominal mass
3.10 Maximum operating mass
4 List of significant hazards
5 Safety requirements and/or measures
5.1 Mechanical hazards
5.2 Electrical hazards
5.3 Thermal hazards
5.4 Exhaust fumes (and gas)
5.5 Machines having a hydraulic power transmission
5.6 Fluid containers
5.7 Water supply and dust emission
5.8 Rotational speed
5.9 Noise
5.10 Maintenance
6 Verification of safety requirements and/or measures
7 Information for use
7.1 Marking
7.2 Accompanying documents
Annex A (normative) Noise test code - Grade 2 of accuracy
Annex B (normative) Dimensions of the flanges for cutting-off
diamond wheels
Annex C (normative) Strength of the guards - State of the art
concerning the characteristics of guards used with
cutting-off wheels
Annex D (normative) Pictograms
Annex E (normative) Verification of surface temperature
Annex ZA (informative) Relationship of this document with EC
Directives
Bibliography
Defines self-propelled and pedestrian controlled floor sawing machines having power feed, manual feed or hand feed for sawing, grooving and milling floor surfaces made of concrete, asphalt and similar mineral building materials where the main power is supplied by electric or internal combustion prime engine.
| Committee |
B/513
|
| DevelopmentNote |
Supersedes BS EN 500-5 and 96/108460 DC (11/2001)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 13862 : 2009 | Identical |
| NEN EN 13862 : 2004 + A1 2009 | Identical |
| UNI EN 13862 : 2009 | Identical |
| UNE-EN 13862:2002 | Identical |
| NS EN 13862 : 2001 + A1 2009 | Identical |
| SN EN 13862 : 2001 + A1 2009 | Identical |
| DIN EN 13862:2010-03 | Identical |
| NBN EN 13862 : 2001 + A1 2009 | Identical |
| NF EN 13862 : 2002 + A1 2009 | Identical |
| EN 13862:2001+A1:2009 | Identical |
| I.S. EN 13862:2002 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 525:2013 | Bonded abrasive products General requirements |
| ISO 6104:2005 | Superabrasive products — Rotating grinding tools with diamond or cubic boron nitride — General survey, designation and multilingual nomenclature |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 6395:2008 | Earth-moving machinery Determination of sound power level Dynamic test conditions |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN 60335-2-41:2003/A2:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.