BS EN 13845:2017
Current
The latest, up-to-date edition.
Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification
Hardcopy , PDF
English
05-16-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Marking
Annex A (informative) - Optional properties
Annex B (informative) - Additional methods of test
Annex C (normative) - Determination of slip resistance
Annex D (normative) - Determination of wear resistance
Bibliography
Defines the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
| Committee |
PRI/60
|
| DevelopmentNote |
Supersedes 03/112800 DC. (10/2005) Supersedes 15/30325178 DC. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the characteristics of floor coverings with sustainable enhanced slip resistant characteristics under specified conditions based on polyvinyl chloride and modifications thereof, supplied in either tile or roll form.
To encourage the consumer to make an informed choice, this European Standard includes a classification system (see EN ISO 10874 ) based on intensity of use, which shows where resilient floor coverings should give satisfactory service.
In addition, this European Standard details the requirements for the information to be included on the packaging labels.
The slip measurements are made in a laboratory on ex-factory floor covering surfaces only. The method described is suitable for testing on wet surfaces.
| Standards | Relationship |
| DIN EN 13845:2015-09 (Draft) | Identical |
| UNE-EN 13845:2006 | Identical |
| I.S. EN 13845:2017 | Identical |
| NS EN 13845 : 2017 | Identical |
| NBN EN 13845 : 2005 | Identical |
| NEN EN 13845 : 2017 | Identical |
| NF EN 13845 : 2017 | Identical |
| UNI EN 13845 : 2006 | Identical |
| EN 13845:2017 | Identical |
| DIN EN 13845:2005-10 | Identical |
| UNE-EN 13845:2017 | Identical |
| BS 8203:2017 | Code of practice for installation of resilient floor coverings |
| 11/30238431 DC : 0 | BS 4592-0:2006:2006+A1:2012 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
| 06/30094358 DC : DRAFT JAN 2006 | BS 4592-0 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON REQUIREMENTS |
| BS 4592-0(2006) : 2006 | FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
| 12/30268021 DC : 0 | BS 4592-0:2006 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 666:1994 | Resilient floor coverings - Determination of gelling |
| EN ISO 10874:2012 | Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) |
| ISO 24346:2006 | Resilient floor coverings Determination of overall thickness |
| ISO 24344:2008 | Resilient floor coverings — Determination of flexibility and deflection |
| EN 661:1994 | Resilient floor coverings - Determination of the spreading of water |
| EN 1815:1997 | Resilient and textile floor coverings - Assessment of static electrical propensity |
| ISO 23999:2008 | Resilient floor coverings Determination of dimensional stability and curling after exposure to heat |
| EN 425:2002 | Resilient and laminate floor coverings - Castor chair test |
| EN ISO 24346:2012 | Resilient floor coverings - Determination of overall thickness (ISO 24346:2006) |
| EN ISO 26987:2012 | Resilient floor coverings - Determination of staining and resistance to chemicals (ISO 26987:2008) |
| ISO 26987:2008 | Resilient floor coverings — Determination of staining and resistance to chemicals |
| EN ISO 24345:2012 | Resilient floor coverings - Determination of peel resistance (ISO 24345:2006) |
| EN 684:1995 | Resilient floor coverings - Determination of seam strength |
| EN 424:2001 | Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
| EN ISO 24341:2012 | Resilient and textile floor coverings - Determination of length, width and straightness of sheet (ISO 24341:2006) |
| EN 662:1994 | Resilient floor coverings - Determination of curling exposure to moisture |
| ISO 23997:2007 | Resilient floor coverings — Determination of mass per unit area |
| ISO 24343-1:2007 | Resilient and laminate floor coverings Determination of indentation and residual indentation Part 1: Residual indentation |
| ISO 24341:2006 | Resilient and textile floor coverings Determination of length, width and straightness of sheet |
| EN ISO 24343-1:2012 | Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007) |
| EN ISO 23999:2012 | Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008) |
| EN 12466:1998 | Resilient floor coverings - Vocabulary |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN 663:1994 | Resilient floor coverings - Determination of conventional pattern depth |
| EN ISO 24344:2012 | Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008) |
| EN 665:1994 | Resilient floor coverings - Determination of exudation of plasticizers |
| EN 432:1994 | Resilient floor coverings - Determination of shear force |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN ISO 23997:2012 | Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007) |
| ISO 24345:2006 | Resilient floor coverings Determination of peel resistance |
| ISO 24342:2007 | Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles |
| ISO 10874:2009 | Resilient, textile and laminate floor coverings Classification |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.