BS EN 13566-7:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
Hardcopy , PDF
05-31-2013
English
04-30-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
3.2.1 Symbols
3.2.2 Abbreviations
4 Pipes at the "M" stage - Requirements for profiled plastics
strips
4.1 Materials
4.2 General characteristics
4.3 Material characteristics
4.4 Geometric characteristics
4.5 Mechanical characteristics
4.6 Physical characteristics
4.7 Jointing
4.8 Marking
5 Fittings at the "M" stage
6 Ancillary components
7 Fitness for purpose of the lining system at the "I" stage
7.1 Materials
7.2 General characteristics
7.3 Material characteristics
7.4 Geometric characteristics
7.5 Mechanical characteristics
7.6 Physical characteristics
7.7 Additional characteristics
8 Installation practice
8.1 Preparatory work
8.2 Storage, handling and transportation of profiled
plastics strips and fittings
8.3 Equipment
8.4 Installation
8.5 Process-related inspection and testing
8.6 Lining termination
8.7 Reconnecting to existing manholes and laterals
8.8 Final inspection and testing
8.9 Documentation
Annex A (informative) - Recommended scheme for assessment
of conformity
A.1 Scope
A.2 General
A.3 Testing and inspection
A.3.1 Material specification PVC
A.3.2 Grouping
A.3.3 Type testing (TT)
A.3.4 Batch release tests (BRT)
A.3.5 Process verification testing
A.3.6 Audit testing tests (AT)
A.3.7 Indirect testing (IT)
A.3.8 Inspection and test records
Annex B (normative) - Test method for watertightness of SWO
pipes whilst subjected to bending
B.1 Scope
B.2 Principle
B.3 Apparatus
B.4 Test piece
B.5 Test temperature
B.6 Test procedure
B.7 Requirements
B.8 Test Report
Bibliography
Describes requirements and test methods for pipes that are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip using a dedicated winding machine in front of the open end of an existing pipeline (e.g. in a manhole).
| Committee |
PRI/88
|
| DevelopmentNote |
Supersedes 05/30127634 DC. (04/2007)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 13566-7 : 2007 | Identical |
| NS EN 13566-7 : 1ED 2007 | Identical |
| NEN EN 13566-7 : 2007 | Identical |
| SN EN 13566-7 : 2007 | Identical |
| DIN EN 13566-7:2007-06 | Identical |
| NBN EN 13566-7 : 2007 | Identical |
| EN 13566-7:2007 | Identical |
| UNI EN 13566-7 : 2007 | Identical |
| I.S. EN 13566-7:2007 | Identical |
| UNE-EN 13566-7:2007 | Identical |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| EN ISO 9967:2016 | Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO/TR 11295:1992 | Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings |
| EN 1979:1999 | Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
| EN 13689 : 2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 9967:2016 | Thermoplastics pipes Determination of creep ratio |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN 13566-4:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
| ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.