BS EN 13463-5:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
Hardcopy , PDF
04-30-2016
English
03-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Requirements for moving parts
6 Requirements for bearings
7 Requirements for power transmission systems
8 Requirements for brakes and braking systems
9 Requirements for springs and absorbing elements
10 Requirements for conveyor belts
11 Marking
Annex A (informative) - Examples for an ignition hazard
assessment report for typical equipment parts and
potential ignition sources
Annex B (normative) - Test requirements
Annex C (informative) - Significant technical changes
between this European Standard and EN 13463-5:2003
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 94/9/EC
Bibliography
Describes the requirements for the design and construction of non-electrical equipment, intended for use in potentially explosive atmospheres, protected by the type of protection Constructional Safety 'c'.
| Committee |
EXL/23
|
| DevelopmentNote |
Supersedes 00/541592 DC. (12/2003) Supersedes 09/30199364 DC. (02/2012)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This European Standard specifies the requirements for the design and construction of non-electrical equipment, intended for use in potentially explosive atmospheres, protected by the type of protection Constructional Safety \'c\'.
1.2 This European Standard supplements the requirements in EN 13463-1, the contents of which also apply in full to equipment constructed in accordance with this European Standard.
1.3 The type of ignition protection described in the standard can be used either on its own or in combination with other types of ignition protection to meet the requirements for equipment of Group I, category M2 or Group II, categories 1 and 2 depending on the ignition hazard assessment in EN 13463-1. Type of ignition protection \'c\' is not applicable for Group I for M1. These requirements are specified in EN 50303.
NOTE Most category 3 equipment, only needs to meet the requirements of EN 13463-1, but some category 3 equipment may have to meet the requirements of this European Standard for some of the ignition sources identified in the ignition hazard assessment.
| Standards | Relationship |
| SN EN 13463-5 : 2011 | Identical |
| UNE-EN 13463-5:2013 | Identical |
| NEN EN 13463-5 : 2011 | Identical |
| DIN EN 13463-5:2011-10 | Identical |
| I.S. EN 13463-5:2011 | Identical |
| UNI EN 13463-5 : 2011 | Identical |
| EN 13463-5:2011 | Identical |
| NF EN 13463-5 : 2011 | Identical |
| NS EN 13463-5 : 2011 | Identical |
| NBN EN 13463-5 : 2011 | Identical |
| DIN EN 13463-5:2004-03 | Identical |
| 12/30258579 DC : 0 | BS 5908-1 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 1: CODE OF PRACTICE FOR PRECAUTIONS AGAINST FIRE AND EXPLOSION IN CHEMICAL PLANTS, CHEMICAL STORAGE AND SIMILAR PREMISES |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| EI SAFE HANDLING STORAGE BIOMASS TPS : 1ED 2016 | SAFE HANDLING AND STORAGE OF BIOMASS IN THERMAL POWER STATIONS |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| PD 6686:2006 | Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries |
| BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 14973:2015 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| EN ISO 340:2013 | Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| ISO 340:2013 | Conveyor belts Laboratory scale flammability characteristics Requirements and test method |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN ISO 284:2012 | Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) |
| EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 1554:2012 | Conveyor belts - Drum friction testing |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.